Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$3.50 - $17.99
CR2032 Lithium 3V battery for SIGMA computers, heart rate monitors, transmitters, and Micro Lights.
Compatible with:
- PC3
- PC4
- PC9
- PC15
- Shape watch
- FIT watch
- Onyx series HRM's
- PC 25.10
- PC 3.11
- PC 10.11
- PC 15.11
- PC 22.13
- RC 1209
- RC 14.11
- RC Move
- Micro Lights
Not Compatible with:
- ROX computers
- BC 1909
- BC 2209
- BC 23.16

$8.79
Wireless mounting bracket for 2012, 2009 STS & 2006 DTS model computers. Handlebar or stem mount.
Compatible models:
BC 1106 DTS
BC 1606L DTS
BC1706HR DTS
BC 2006 MHR DTS
BC 1009 STS
BC 1609 STS
BC 8.12 ATS
BC 12.12 STS
BC 14.12 STS
BC 16.12 STS
Baseline 1200 plus

$8.79
Replacement handlebar/stem mount for wireless CR 2450 computers.
Compatible devices:
ROX 8.0
ROX 9.0
ROX 8.1
Rox 9.1
BC1909HR
BC2209MHR
ROX 5.0
ROX 6.0

$21.99
Enjoy easy viewing with the Butler Out Front handlebar mount!
Out Front Mount for following models:
BC 1909 STS
BC 2209 STS
ROX 5.0
ROX 6.0
ROX 8
ROX 8.1
ROX 9
ROX 9.1
*Note: not for use with ROX 10.0

$29.99
STS Cadence transmitter for all wireless cadence equipped Sigma bicycle computers. Can be installed with o-rings or zip ties and has an adjustable pivot point to allow for more customizable installation options. Includes pedal insert cadence magnet that can be attached to the pedal for low clearance installations or use the included plastic insert for non-magnetic pedals.
Compatible models:
Topline 2009:
- BC 1609 STS
- BC 2209 MHR
- BC 1909 HR
- BC 2209 Targa
Topline 2012:
- BC 16.12 STS
- BC 12.12 STS
- ROX 5.0
- ROX 6.0
- ROX 8.0
- ROX 8.1
- ROX 9.0
- ROX 9.1
Topline 2016:
- BC 14.16 STS
- BC 16.16 STS

$133.99
Shimano BT-R1A External Di2 Battery
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
- Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems
- Battery weight: 71 grams

$174.99
Shimano Di2 External Battery Mount
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware

$179.99
Shimano Di2 External Battery Mounts
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware

$29.99
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters.
Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers.
- Bluetooth adapter for PCs to work with Rouvy
- Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers.
- Works with PC desktops and laptops.

$4.99
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705.
- Glass-filled nylon, stainless steel Torx T25 bolt
- Weight: 20g

$15.00
- Use to keep Blips in place on handlebars
- Fits 31.8mm round portion of drop bar
- Clamp mounts directly to bar outside of tape zone
- Ideal for use with thumbs or index fingers while hands are on the tops
- Right and left specific, just like Blips
- Weight: 12 grams (for pair)
- Material: Polypropylene
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap

$21.99
External Blip mount for aero extensions and base bars
- 360 degree rotation for adjustment
- Aero use only to fit 22.2mm OD bar 65mm in length
- Fits all Zipp aero extensions and base bars
- Blips not included
- Weight: 57 grams for pair (does not include Blip)
- Material: Polypropylene + TPE
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap

$45.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap

$55.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap

$77.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes up to 60 minutes to complete.The eTAP Powerpack includes a battery charger, cord, transmitter, and international adaptors (US/EU/GB).

$110.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.
- Limitless remote shifting positions for drop and aero bars
- Wired shift buttons can be positioned however the rider prefers
- Connect to Blip Box or drop bar eTap levers
- Compatible with SRAM RED eTap shift/brake controls

$121.00 - $124.99
- Shift buttons mounted to the end of a bar plug
- Included wire connects to Blip Box
- Fits bars with 19 - 20.5mm inside diameter

$330.00
SRAM's BlipBox is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position.
- BlipBox mount included
- Replaces standard drop bar shift levers
- Limitless aero configurations
- Up to two positions per side
- Fits a standard Garmin mount or the included mount

$385.00
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero.
- Replaces standard drop bar shift levers
- Simple and intuitive eTap shift logic
- AXS enabled for easy personalization
- Limitless aero configurations
- Two ports per side for Blips
- Fits the included optional stem mount
- Compatible with existing eTap Blips and Clics
- Mounts inside stem faceplate cap, feed box or frame

$19.95
Free up bar space and secure your GoPro and many other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated.
- Compatible with Ritchey C220 and 4-Axis 44 stem faceplates
- Forged and machined alloy
- Includes extended-length hardware

$35.00
Spare parts for Quarq's ShockWiz automated suspension tuning device.
- Contains a rubber mounting boot, four zip ties, plastic cap and two o-rings.

$50.00
Spare hose kit for Quarq's ShockWiz automated suspension tuning device.
- Contains one of each hose type and four zip ties.

$329.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style.
ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain.
With ShockWiz, you know exactly how your suspension is performing – and how to make it better.
Features & Benefits:
- Automated tuning recommendations
- Shock tuning score - a snapshot of how well your suspension is set up for you
- Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill.
- Inexpensive, replaceable CR2032 battery lasts for months
- Waterproof and dustproof - IP67 rating
- Two alternative hoses (included) offer a range of fitting options
- Smartphone app is compatible with Apple and Android phones
Essential Details:
- ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use.
- You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive.
- Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app.
- In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.

$379.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. Lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style.
ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed and terrain.
With ShockWiz, you know exactly how your suspension is performing – and how to make it better.
The Direct Mount version is for inverted forks such as the RockShox RS-1.
Features & Benefits:
- Automated tuning recommendations.
- Shock tuning score - a snapshot of how well your suspension is set up for you.
- Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill.
- Inexpensive, replaceable CR2032 battery lasts for months.
- Waterproof and dustproof - IP67 rating.
- Two alternative hoses (included) offer a range of fitting options.
- Smartphone app is compatible with Apple and Android phones.
Essential Details:
- ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use.
- You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive.
- Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app.
- In the box: ShockWiz hardware, two hoses, adapter for conventional forks and rear shocks, rubber mounting boot and zip ties.

$10.99
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

$7.49
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments.
- Lightweight alloy headset spacer with nylon body (9g)
- Compatible only with Shimano Di2 Junction Box
- 95mm length, 44mm width, 6mm height
- 6 Degree angle

$12.99
• To position the Shimano Di2 battery inside the fork steerer
• Including stainless steel tool to remove the set.

$74.99
The Vibe Aero Race Mount is designed for the PRO Vibe Aero handlebar/stem combination. Made of high-quality CNC machined 6061-T6 Aluminum, it fits all Pro handlebar/stem combinations.
- Compatibility (Regular): GARMIN 820, 520, 25, 20
- Compatibility (XL): GARMIN 1030, 1000, 820, 520, 25, 20
- Lifetime Guarantee
- Weight: 30g

$13.99
Wire harness and hardware to measure computer data based on the front wheel.
- Fits most bars bars (25.0 to 31.8mm), 86cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties
- Compatible with: Protege 5.0, 8.0 and 9.0

$13.99
Protege wire harness and hardware with extra length for use with tandem and recumbent bicycles
- Contains bracket with 160cm wire, wheel magnet and zip ties
- Brackets fits Standard (25.4-26.0mm) bars
- Compatible with: Protegé 5.0, 8.0 and 9.0
- Ideal for long wheelbase recumbent and computer installs on a tandem’s rear bars
$29.99
- Contains universal handlebar/stem compatible bracket, sensor and magnet
- Compatible with Protege 9.0 wireless computer
- Will not convert standard Protege 9.0 to wireless

$48.00
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem
- Made in the USA
- Material: 6061 Aluminum
- Weight: 24g
- Outside Diameter: 26.0mm
- Stem Size: Threadless 1-1/8"

$49.00
- Designed to securely attach a GoPro camera to the top of a 1-1/8" threadless stem
- The Camera Mount can be attached directly to the camera's case for a solid connection, or can be fitted with an articulated GoPro Pivot Arm for more adjustability
- Compatible with all HERO3, HERO2, and HD HERO Original GoPro cameras
- Made in USA

$15.99
- Superlight computer/light mount fits cleanly underneath the stem
- Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer
- 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm

$19.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter

$19.99
Keep your handlebar organized and your devices secure with the SWG-400 (28/35mm) SwingGrip from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- On Stem installation only
- Lightweight and rustproof alloy construction
- Angle adjustable arm design
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove

$24.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 27mm-35mm diameter

$34.99
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles.
- Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media
- SM clamp easily mounts or dismounts from the handlebar or tube
- Spring-loaded clamp system is simple to use and securely holds your device in place
- Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system
- Can mount to your repair stand so you can easily reference the Internet when working on your bike

$5.00
Replacement magnet for MSW Miniac Double Speed & Cadence computers. Includes water-resistant cadence magnet and four plastic zip ties for mounting to pedal crank arm.

$9.99
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters.
- Tool-free installation
- Alloy construction
- Fits round and bladed spokes

$14.99
Handlebar mount to fit Miniac 322 and 333 GPS computers. Fits up to 31.8mm round handlebars. Plastic construction with rubber shim.
- Keeps handlebar clean
- Adjustable height angle for better visibility during riding
- Simple one bolt attachment

$39.99
Designed to specifically work with the MSW Double Wireless Cycle Computer, this sensor receives both speed and cadence information and is digitally coded to eliminate electronic interference from other devices.
- Strong 2.4 GHz signal allows rear chainstay mounting with fast and reliable transfer of information to the head unit
- Includes mounting hardware and shims to fit various diameter and shapes of tubing
- Sensor must be paired with specific MSW Double Wireless head unit
- 24g

$3.99
Easily secure your GPS cycling computer to your favorite bike.
Includes:
- Two sets of O-rings (two diameters)
- A backup O-ring in each size

$6.99
Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.

$15.99
The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.

$44.99
Advanced 2-in-1 speed and cadence sensor. Conforms 100% to Bluetooth Smart standards for max compatibility. Powerful rare earth magnet provides wider engagement spacing. Durable, lightweight polycarbonate construction with translucent body and LED indicators. Adjustable swingarm and versatile mounting system. Replaceable CR2032 coin cell battery optimized for long-lasting use. Includes O-ring mounts, spoke magnet, crank arm magnet.

$99.00
KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation.
- Measures up to 2.5mm elongation
- Fits all chains including 11 speed
- Handy electronic device
- Stainless hardened metal body

$5.00
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break.
- Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503)
- Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

$5.00
Replacement plastic insert kit for K-EDGE Wahoo Mounts.
The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break.
Attributes (specs):
– Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604)
– Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

$9.99
Hand tight adjustability and 4mm hex wrench lockable.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatibility: Combo Mounts, Light&Camera Mounts.
- Aluminum knurled thumbscrew
- Stainless Steel bolt with 4MM hex feature
- Weight: 10g
- Anodized Color: Black
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded

$19.99
Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000.
- Camera Adapter mount with GoPro style interface
- Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560)
- Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer.
- Centers camera in out of site position
- Improves video clarity by removing plastic mount shake
- Colors: Anodized Black
- Weight: 14grams
*Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

$19.99
This NiteRider Adapter is sold separately from K-EDGE “Combo Mount."
- Precision Machined 6061-T6 Aluminum
- Anodized Gunmetal
- Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface
- Enables compatibility with K-Edge GoBig Mounts and Combo Mounts
- 2x M4 Mounting bolts with Nylok included
- Compatible with Lumina Series, Mako Series
- Weight: 11.5 grams

$24.99 - $34.99
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system.
The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem.
Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
- Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm,
- Recommended for 0 Degree to Negative Degree Stem Angles
- Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

$24.99
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already have a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820).
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface
- Compatibility: All Garmin Edge Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.)
- Made in Boise, Idaho, USA.
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

$24.99
The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc.
- CNC Machined 6061-T6 Aluminum
- Injection Molded Copolymer Interface
- Compatibility: Wahoo ELEMNT
- Lifetime Warranty
- Weight: 18g
- Anodized Colors: Black

$24.99
An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system.
- Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI
- Compatible – 1-1/8? Steerer tube Diameter,
- Thickness: 5mm, Length 50mm (Center-to-Center)
- Recommended for 0 Degree to Negative Degree Stem Angles
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Weight: 25g
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

$29.99
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20.
- Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system
- Fits 31.8MM Handlebars
- NOT combo compatible
- Weight: 48g
- Anodized Color- Black
Page 1 of 4
Next page