Parts & Accessories
Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors
Replacement chainstay cover for DuoTrap S Digital Sensor
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Light up the road Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. - Blendr is an elegant, integrated accessory mounting solution - Clip can be rotated for compatibility with many Bontrager accessories - Works with any Blendr-compatible stem and the accompanying base
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices
Replacement chainstay cover for DuoTrap S Digital Sensor
Are you looking for an incredibly simple way to mount your phone to your bicycle? Do you want that case to have a plethora of mounting options and accessories? Well... look no further than the ElastoKASE from BiKASE. Utilizing the 1/8 turn connection of the GoKASE and the simplicity of a rubber lined, gripping shock cord, the ElastoKASE is your "go to" phone or anything case. • Phone holder for 6-inch phones and smaller • Works with GoKASE attachments and brackets • Material: TPE & Shock Cord
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for GoPro camera - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor
- Micro Mount for Phones - Aluminum and composite construction securely holds any phone with any case for minimalist profile - Unique patent-pending design with proprietary stretch material grips your phone - Easy mounting under any standard stem. - Tighten to stem cap 6Nm torque.
Universal phone holder with quick release bracket for diameters 24mm to 38mm and works great with any phone. Fits with aftermarket cases for phones such as iPhone X, iPhone 6,7,8 & iPhone X, XR, XS, X Max, X Max R. Holder is on a ball socket so can rotate 360 degree’s for viewing at any angle. Can use as an out front mount and comes in handy when you have lights, or other devices mounted on handlebar, because will provide a few inches of clearance from bar. Works on Bicycles, E-Bikes, ATV’s, Motorcycles, Snowmobiles, and UTV’s.
Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
Computes and Transmits Meaningful Data - Computes and sends 6 running dynamics metrics to your compatible device - Battery life: replaceable battery lasts up to 1 year (assuming 1 hour daily use) - Automatically turns itself on and off - Tiny size: at less than 0.5 ounces, you'll forget it's there - Compatible devices connect with the Garmin Connect Mobile app to automatically sync your data and connect with others Train Hard, Run Free The Running Dynamics Pod easily clips onto your waistband to measure the running dynamics you need to beat yesterday. It gives you the option to run without a heart rate monitor chest strap. Once paired with your compatible smartwatch, just clip it to the back and center of your waistband and start your run. Review Your Form View and analyze important running metrics such as your cadence, stride length, ground contact time and balance, vertical oscillation and vertical ratio. These biomechanical measurements can help you understand your running form so you can perform better on race day. How It Works: The Running Dynamics Pod has an accelerometer in the module that measures torso movement to calculate these 6 running metrics: - Cadence is the number of steps per minute. It displays the total steps (right and left combined). - Ground contact time balance displays the left/right balance of your ground contact time while running. It displays a percentage. For example, 53.2 with an arrow pointing left or right. - Stride length is the length of your stride from 1 footfall to the next. It is measured in meters. - Vertical oscillation is your bounce while running. It displays the vertical motion of your torso, measured in centimeters for each step. - Vertical ratio is the ratio of vertical oscillation to stride length. It displays a percentage. A lower number typically indicates better running form. - Ground contact time is the amount of time in each step that you spend on the ground while running. It is measured in milliseconds.
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.
• To position the Shimano Di2 battery inside the fork steerer • Including stainless steel tool to remove the set.
KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation. - Measures up to 2.5mm elongation - Fits all chains including 11 speed - Handy electronic device - Stainless hardened metal body
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Connect your desktop to CycleOps VirtualTraining.
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
STAY AWARE OF APPROACHING CARS This rearview radar pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind. - Reliable rearview radar lets you ride like you know what’s coming. - One radar. Multiple display options. Pair it with your compatible Garmin device, your phone or both. - Don’t have an Edge or other compatible device yet? No problem. The Varia app has you covered. - It’s small, it’s easy to mount, and it works with just about any bike. - Get more life out of your radar with up to 7 hours of battery life. MAXIMUM AWARENESS - Varia RVR315 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — to indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 7 hours of battery life. In the box: - RVR315 - Mounting hardware - Power cable - Documentation
The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc. - CNC Machined 6061-T6 Aluminum - Injection Molded Copolymer Interface - Compatibility: Wahoo ELEMNT - Lifetime Warranty - Weight: 18g - Anodized Colors: Black
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame
Versatile GPS and accessories forward mount. Multiple mounting options to maximize GPS and accessories placement. Composite matrix construction with aluminum arms. Bolts directly to stem faceplate. Lezyne X-Lock and GoPro mount compatible. Includes mounting hardware. - Direct X-Lock Mounting System not compatible with all stems.
$49.99 - $54.99
This is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Supported Computers – Most Garmin Edge, Forerunner, and Touring models, including the new Garmin Edge 520, Edge 20 and Edge 25 models (Edge 1000 - fits on the longer XL mount) - Combo Compatible – versions available that support GoPro style interface action cameras and lights - Weight – (31.8 mm) Standard Mount 45.4 grams; Combo Mount 55.4 grams Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *TheNEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
Page 1 of 6 Next page