Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories

$21.99
Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units.
- Fits up to 1-inch handlebars

$13.99
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames).
- If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

$94.99
Specialized's Road Kit is the complete SWAT technology solution for the new SWAT-prepped Roubaix and Ruby road bikes. This kit seamlessly integrates storage for everything that you need in the event of roadside repairs.
- Includes SWAT Road multi-tool, CO2 twist head, 700c Turbo tube, valve extender, and money clip.
- Also holds 16g CO2 cartridge (not included).
- For use on applicable SWAT-prepped Roubaix and Ruby bikes.

$32.00
Salsa's Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point.
- Strong rack attachment points
- 34mm-wide rack mount threaded for M5 bolts
- Stainless steel pivot and bolt
- Available for 27.2 and 31.6mm diameter seatposts
- Black anodized with laser-etched logo
- 44g for a 31.6mm collar
- Not for use on carbon seatposts
- Note: Post-Locks do not have a lip like Salsa's Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.

$13.95
These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories.
- Screw them into the same holes on the dropouts for rack or fender bolts
- Made from special hardened aluminum stock with a threaded steel insert
- Best when only torqued to the same degree as rack bolts
- Pegs are about .75" long
- Can be used single sided or double sided
- Sold in Pairs

$12.99
Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.

$10.99
- Soft non-slip webbing material
- Triple strap strength to hold down cargo
- Double vinyl hooks for secure mounting
- 24-inch length works with most racks

$11.99
Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.

$9.99
Storage made simple
Pack the essentials for every ride with the Bontrager Storage Bottle. It features secure storage for multi-tool, tubes, tire lever, CO2, and patch kit that easily fits in any standard water bottle cage.
Key features
- Wide opening for easy access
- Fits in standard water bottle cages
- Securely holds tools, CO2, spare tube, tire levers and more

$14.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost.
CONSTRUCTION
• Aluminum

$14.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost.
CONSTRUCTION
• Aluminum

$30.00
The EVOC FRAME PAD protects the bike frame from scratches and other transport damage.
- Fits most bike frames
- Attachment for handlebar
- Velcro straps attachment

$24.95
While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost.
- Allows the usage of seat packs on a dropper post
- Protects the dropper stanchion from wear and grit
- Can act as a travel limiter when full drop isn't needed
- Sized by stanchion diameter

$6.00
Replacement hardware, bolts and nuts for Wald baskets.
Works with Wald Basket models: 520, 520GB, 535 and 535GB

$79.99
Keep the adventure rolling on your Trek 1120 with a fresh new rear harness system.
- Original equipment replacement rear harness system for Trek 1120 bikes
- Replacement strap system to attach a bag to the Trek 1120 rear rack
- For best fitment, an 8L dry bag is recommended-

$6.95
Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

$22.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

$19.99
Fast and easy attachment of Topeak handlebar bags.
- Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)

$19.95
Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

$9.95
Thule's Pack 'n Pedal Rail Extender Kit increases rider heel clearance by moving your panniers further back. The extenders can be used on either a front- or rear-mounted Thule Tour Rack (sold separately).

$9.95
Accessory to attach Thule Pack ’n Pedal pannier magnet onto virtually any other bike rack.
• Attach the Thule magnet to the adapter bracket (sold separately) for attachment to virtually any type of bike rack.
• Versatile design allows for a variety of attachment options.

$33.50
Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails.
WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

$70.00
Dummy Rails support Dummy Bags on your Big Dummy cargo bike, and Surly's Dummy Deck bolts directly to them, stiffening the whole system for a more stable load. Dummy Rails are made of light, strong aluminum and were designed in conjunction with the Dummy Deck and Dummy Bags; each component works best when used with the others. Like all Surly products, they've built in lots of useful details. For example, the deck-attachment bosses stick up from the rails to create space between the deck and rails, providing windows to route tie-down straps and cordage; and threaded bottle cage bosses located at the rear of each rail provide mounting locations for accessories: bottle cages of course, or lights, cameras, pumps, flags, horns, light saber scabbards, disco balls, spittoons, cornucopias, etc. Dummy Rails will work with cargo frames (including the Surly Big Dummy) built around Xtracycle's longtail standards.

$40.00
Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps.
- Pack of 6

$10.00
The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else.
- For general tie down use
- 42" loop strap, plus 8" closure buckle strap

$24.00 - $28.00
Designed for use in the Surly Petite Porteur House. Neon color to make it easier to find objects inside a dark bag.
- Urethane coated, water-resistant nylon stuff sacks
- Drawstring closure

$17.49
$35.00
50% Off
Spare Stabilizer rack for the Burra Burra Stabilizer Seatpack 10/20.
- Only compatible with the Burra Burra Stabilizer Seatpack 10/20.

$3.95
$5.00
21% Off
Replacement buttons and straps for the Remora Aero Storage.
- Rubber straps and buttons to secure the Remora Top Tube Storage container.

$16.99 - $17.99
The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike.
- UV- and weather-resistant
- Includes band to keep excess strap out of the way
- 22" length is best for use with Salsa Anything Cage and Anything Cage HD
- 30" length is best for use with Salsa Anything Cradle
- Sold in pairs

$14.99
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level.
- 32mm diameter clamping area for lights
- Attaches with two M5 bolts and a steel backing plate
- Mounts on left or right side

$5.99
Compatible with Shiner and Shiner Back lights
- Rubber pad with loop straps to quickly mount and remove light for recharging
- 50mm bolt spacing to fit most rear racks

$14.00
If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.

$30.00
Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.

$14.99
The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames.
- On-bike storage solution
- Inner sleeve to compress a tube
- Silicone strips for stability
- Compact and lightweight
- Attach under the seat or other locations on the bike frame
- Weight 1.3oz (37g)

$24.99
The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle.
- On-bike storage solution
- Inner sleeve to compress the tube
- Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc.
- Wide strap and durable metal buckle
- Silicone and rubber grip for stability
- Compact and lightweight
- Attach under the seat or other locations on the bike frame
- Weight 4oz

$11.99
Jandd's Rack Bungee is made with flat braided elastic for better load control.
- Each strap is made up of 2 lengths of bungee so that the load is held front and back with 1 strap

$12.95 - $13.99
Jandd Rack Extenders are used for mounting rear racks to braze-on points or the mono-stay adapter.
- Sold in Pairs

$8.50 - $8.80
Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points.
- Stainless Steel Coated Clamp
- Sold as a Pair

$19.99
Electra's Quick-Release Basket Mount is a great, easy way to attach your Electra Quick-Release Basket (sold separately) to your bike.

$9.99
Electra's Wicker Basket Bracket Kit offers additional support to keep your Electra Wicker Basket (sold separately) securely in place, which allows you to carry even heavier items, such as books and groceries. The steel bracket attaches directly to your bike via the headset and the basket simply bolts to the bracket. You even get 2 brackets, one for standard 1-inch, and one for oversize 1 1/8-inch headsets.

$12.99
A stretch web net that helps secure items to a rear rack.
- Four nylon molded hooks for rack attachment
- Fits any rack
- Dimensions: 11 x 11"
- Custom-molded silicone
- Stretches to three times its size

$10.99
- Stretch web secures those hard-to-hold items
- Great for any rack
- 4 easy-to-handle molded hooks attach anywhere
- Dimensions 11" x 11"

$14.99
- Expands up to 2x size to securely grip any shape
- Weatherproof material will not deteriorate
- Molded non scratch hooks

$49.99
This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits.
Features:
- Coated 70D nylon fabric keeps cargo dry
- High viz fabric with reflective detail to keep you safe while you ride
- Draw string tensions fabric around cargo
- Center strap with buckle wraps around back for a secure fit
- Velcro frame mount for cover storage sack
- Compatibility: 2010 – Current Travoy
- Weight (lbs/kg): 0.31 / 0.14

$24.99
An adapter plate that easily mounts to many trunk bags to add the versatility of the MIK rack and bag system.
Add the versatility of MIK to your bags and racks
The adapter plate mounts to bike trunk bags with 10cm-wide rack mounting slots, bringing the benefits of the MIK system to your standard bike bag. When you add this adapter, you'll be able to secure bags to your MIK-compatible rack to help deter theft, while ensuring it's still easy for you to remove them when you need to. Hardware included.
Product details
- Adapter plate adds MIK compatibility to trunk bags and baskets
- Easily mounts to bags with 10cm-wide rack mounting slots
- Compatible with most Electra bags
- Securely mounts with just four bolts

$2.99
Easy on, easy off storage
Genuine Bontrager replacement parts for your Trunk, Pannier, Quick Cleat and Handlebar Bracket Interchange bag systems.
Product details
- Designed to allow Bontrager Interchange Handlebar Baskets to fit 31.8mm bars
- Includes a pair of 31.8mm clamps

$29.99
The Pet Cover for the DairyMan Rear Basket will certainly be the perfect pet carrier for your bicycle. The Pet Cover easily attaches to the DairyMan Rear Basket using a drawstring. It also has a full zip opening so you can easily put in and take out your small pet. The top of the Pet Cover is made with a mesh material for breathability and constant air flow. Most importantly, the Pet Cover comes with a bottom pad for your pet to have a comfy ride!
Size: 15? x 13? (fits most baskets of this size)
We have designed this basket to be fit perfectly with the DairyMan Rear Basket by BiKASE (p/n 1055)
- 8? tall
- Made of Nylon and EVA
- Reflective logo
- Mesh cover for breathability
- Includes bottom pad

$39.99
This stem holder comes in classic black and is designed to attach your Basil basket to the front wheel of your bike. This system is suitable for use with both men and women’s bicycles with ease. If you’re after performance and durability, this attachment provides all the strength and stability you need, keeping your basket firmly fitted to your bike. Not only does this reduce maintenance, it also means you can put your bike through more without the worry of your basket coming free. Perfect for enjoying enhanced safety and stability on the go. What’s more, because of it’s quality steel construction, this component will hold up well against the elements and last you for a long time to come. The fastening system is also suitable for various types of bikes and fits stems with a diameter of 22 to 25.4 mm. Browse more essential items from the Basil range online today, from baskets and bags, to essential fasteners and fixing essentials.
Features:
- Basil Permanent-S II stem holder.
- Designed for fitting of baskets to the front of your bike.
- Made from hard-wearing steel for longevity.
- Suitable for handlebar stems measuring 22 to 25.4 mm.
Page 1 of 2
Next page