Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Bontrager Air Support Mounting Bracket Retaining Band
$1.99
• Compatible with Air Support HP, HP Pro, HV (429231, 429232, 429233, 429234, 429235)
Bontrager Presta Valve Extenders
$19.99 - $24.99
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.
Bontrager Tire Tread Depth Gauge
$24.99
Similar to an accurate chain checker, this tool is designed to give you a quantitative measurement on exactly how worn your Bontrager tires are. Use this highly accurate gauge with the chart in the product image, which shows Bontrager's minimum recommended tread depth. - Dial gauge designed to precisely measure Bontrager tire wear - Use in conjunction with the chart in product image to know minimum tread depth - The tire should be measured on the center knobs with multiple points taken - The perfect tool to prove how worn a tire is and thus replace at the proper interval
Crank Brothers Klic CO2 Inflator Head
$9.99
Klic Co2 head/cartridge adaptor replacement
Fabric Accubar Pressure Gauge
$59.99
Hit the trails with confidence and gain psi-perfect control of your ride with the Accubar tire pressure gauge. Get pinpoint tire pressure accuracy, delivering off-road excellence, in any condition. Specifically designed for mountain bike tires when accuracy under 40psi is essential. It even attaches to any pump for faster, easier, more accurate tire pressure, when it matters most. - Highly accurate - Low pressure gauge - Works as standalone gauge - Use in-line with pump - Fits Presta or Schrader valve
Genuine Innovations Tubeless Tire Repair Kit
$9.99
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
Genuine Innovations Side of Bacon
$15.00
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
Genuine Innovations Tubeless Tackle Kit
$24.99
One tubeless bicycle tire tool to rule them all. Compact and versatile, this is the ultimate tubeless tire repair tool. Never get stuck on the side of the trail again! Self-contained tire repair kit includes: 5 tubeless repair plugs 2 Presta core valves Integrated valve core removal tool Small, strong plugger tool Alloy weatherproof storage capsule
Jandd Pump And U-Lock Tie
$4.95
Made of heavy-duty hook-and-loop material, the Pump and U-Lock Tie also has a neoprene pad stitched next to the rectangular plastic common loop. Put the neoprene pad between your pump and frame, double-back the hook strip onto the loop, and you can rest assured that no matter how hard you ride, your pump will stay put. In addition to attaching pumps, the Pump Tie is also excellent for securing U-locks, fishing poles, and other delicate items that require a secure bond and a load-damping pad. - Dimensions: 1.5 x 10 inches - Weight: .5 ounces/14 grams
Lezyne Composite Matrix Pump Mount HP
$5.99
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
Lezyne Composite Matrix Pump Mount HV
$5.99
Replacement Composite Matrix pump mount for all High-Volume hand pumps (HV, Tech HV, Micro Floor HV/HVG, Alloy, Carbon Drives). Includes Velcro pump strap.
Lezyne ABS-1 Pro HP Chuck
$17.99
Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.
Lezyne ABS-1 Pro HV Chuck
$17.99
Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.
Lezyne 350 PSI Digital Gauge
$39.99
350 PSI replacement pressure gauge for all floor pumps with 2.5-inch gauges, includes glue and O-ring. Highly precise with a 1.5-inch screen and two-button system for easy use.
Lezyne Micro Floor Drive Hose w/Digital Gauge
$54.99
This is a replacement hose for your Lezyne Micro Floor Digital Drive pump. It offers an integrated, highly advanced, inline digital gauge and ABS Flip-Thread chuck.
MSW Airlift Floor Pump Replacement Hose Kit
$10.99
Replacement hose kit for MSW AirLift floor pumps. - Smart head fits on both Presta and Schrader valves - Extra-long 48-inch hose - Barb-type hose connection
Park Tool Emergency Tire Boot
$4.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Park Tool Super Patch Kit (Carded)
$4.99
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park Tool Vulcanizing Patch Kit
$4.99
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Park Tool Pump Rebuild Kit (for PFP-3, PFP-6, and PFP-8)
$9.99
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Park Tool Shop Inflator
$140.99
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!
Planet Bike Dial Gauge Tire Gauge
$17.99
Planet Bike's Dial Gauge makes it easy to ensure you always have the right pressure in your tires, which makes the riding easy and helps prevent flats. Built to last, this quality gauge works on all valves and has a large easy-to-read dial.
Prestacycle Spin Head Rebuild Kit
$2.95
Renew all the seals in your Prestaflator spin head. These o-rings fit the seals, Plus there are five (5) Presta Valve replacement washers. Replace as needed for a good connection to your tire valve.
Prestacycle Prestaflator Rebuild Kit
$3.95
Renew all the seals in your Prestaflator tool. These o-rings fit the hose, Pressure Release button and Trigger Plunger on a Prestaflator tool. Kit also includes internal trigger-plunger washers for 2010 and newer Prestaflator tools. O-rings made from high quality buna-nitrile (BN70) rubber with a durometer rating of 70. Updated 2013 Plunger seal is more reliable and gives the tool easier trigger regulation and retro-fits to 2010 and newer tools. Presta Head washers and rebuild kits are now sold separately.
Prestacycle Urethane Elastomer Presta Head Gasket
$4.95 - $5.95
Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
Prestacycle Presta Head Rubber Gasket
$4.99
Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.
Prestacycle Safety Blower / Low Pressure Inflator Tip
$5.95
Allows you to reach into difficult places with your Prestaflator hose. Great for cleaning and drying parts on-or-off the bike. If the tip is blocked, The safety feature releases air away from your work so you can maintain control. Can also be used to inflate low pressure vinyl-valve items (beach-ball type). The safety release feature will help prevent over-inflation. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Note: The safety feature is only functional when the tip is used on a Prestaflator.
Prestacycle Schrader Hose Barb
$5.95
Use it to upgrade your floor pump or tankless electric inflator to use Prestaflator heads and accessories. Made with 6061-T6 Alloy – Strong as Brass and only 1/3 the weight. Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump’s hose.
Prestacycle Spin Head Hose
$9.95
Braid-reinforced PVC hose is stronger than Prestacycle's original Black hose from a few years ago, and also twice flexible! Schrader Spin-on head accepts all Presacycle Head, new and old. 200 psi working pressure, 13 inches length. Uses standard 1/4" threads. Non-marring and resistant to moisture, fungi, oil, fuel, and grease as well as abrasion, impact, and tearing. Operating temperature range is from -30° to +125°F. Fits all previous Prestaflator tools, o-ring included.
Prestacycle Alloy Quick Coupler Kit
$12.95
Upgrade your heavy Brass or Steel coupler. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Less weight in your hand means you can focus more energy on your work. Coupler weight 31 grams, compare to around 100 grams for Brass or Steel. I/M (Industrial / Mechanical) standard sizing will also fit your existing I/M connectors. CNC machined with stainless steel bearings and a nice polished finish. Kit option includes coupler plus three male plugs and one female plug.
Page 1 of 3 Next page