Prioritizing the buffet of gear laid out on your living room floor can be a painstaking process. Should you take this? Will you need that? We have an easier solution: Throw the new Mini-Skinny on the roof and take all of it. With as much space as a comparable “fat” basket and 50-percent more usable crossbar space, you’ll be packing your gear, your friend’s gear and your friend’s dog’s gear. Half the width—Twice the fun. Offers fit options for the best of both worlds. Your worlds, whatever worlds they may be. Be it cycling, kayaking, or road tripping to the ski lodge. The Skinny’s distinct design provides the same load surface as other “fat” cargo racks while leaving 50% of usable crossbar space for, you know, whatever you need. -1 Bike Capacity (50lb bike, 9mm skewer) -Roof bar mounts come equipped with lock cores -Comes fully assembled -Matte Black Powder Finish -Fairing included with silver accents -Mounts to most factory & all aftermarket cross bars -1 Integrated bike mount with skewer -160 lb. capacity with bike & gear (always adhere to cross bars posted weight limits) -Max crossbar size-4.5” wide by 1.75” thick -2 piece design with option for Mini Skinny Extender to allow for more room -Two-Piece: 68” L x 23” W x 7” H
RockyMount's Brass Knuckles rack gets your bike from point A to point B with the minimum of hassle and the maximum of security. The aluminum arm uses finely indexed ratcheting to hold front bike wheels from 20- to 29-inches with widths from skinny road tires to fat DH monsters. Form-fitting mounting hardware plays nicely with almost any roof-mounted bars: round, square, or aero. When your bike isn't on the roof, the arm folds down for an extremely low profile for minimal wind noise and maximum gas mileage. For extra security, you can lock the bike to the rack and the rack to your car with lock cores (sold separately).
Made to fit Seasucker's Bomber and Mini Bomber bike racks – just swap the Add-On Front Wheel Holder for one of the fork mounts, and now your front wheel doesn’t have to ride in the trunk anymore. Elongated entry slots for the skewer allow the wheel to rest on the platform of the rack, providing additional stability when driving. Made for standard road, cross and MTB wheels, but requires the MTB Plugs (sold separately) to hold a 15/100mm or 15/110mm (Boost) through-axle. Made from .25-inch powder-coated aluminum. Fits all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.
The Flight Deck turns your regular old Rear Wheel Strap into a front-wheel holding superstar. It can be used with the Talon, Mini Bomber or Bomber, and uses the existing Rear Wheel Strap as part of the package. The front wheel mount features elongated entry slots for the wheel’s skewer that allow the wheel to rest on the platform of the rack, providing additional stability when driving. The .25-inch aluminum front wheel mount fits up to a 29" wheel and sits on a black HDPE platform. Made for standard road, cross and MTB wheels. Requires the MTB Plugs to hold a 12/100mm or 15/100mm through-axle. NOTE: this product is incomplete on its own - it MUST be combined with an existing Rear Wheel Strap to work. Approx. 13" x 6" footprint.
2019 Model Talon comes standard with our Universal Huske Fork Mount upgrade, 9mm plugs and a quick release skewer. The Talon is our workhorse, 1-bike carrier and our best seller. It’s a fork-mount-style rack, with three of our powerful 210 lb. pull-strength rated vacuum cups holding it onto your car’s roof, trunk or back glass. A 22-inch Rear Wheel Strap is included to secure the back tire. This rack is small and light enough to fit into a bike bag or carry-on luggage for you adventurous types who travel with your bikes. Probably the easiest rack in the world to install, and removes in just seconds without the need for glue or costly installation. Fits on virtually any car. Minimal assembly required.
2019 Model Mini Bomber comes standard with our Universal Huske Fork Mount upgrade, with 9mm plugs and quick release skewer. The Mini Bomber is probably our most versatile model. This 2-bike fork-mount rack is designed to attach to your car’s roof, trunk, or your SUV’s back glass. The HDPE body flexes to conform to your car’s curves. With four 6-inch SeaSucker vacuum mounts, this rack has plenty of muscle. Fits on virtually any car. Minimal assembly required.
$499.00 - $559.00
Our new roof rack system designed for extreme versatility & portability. The Monkey Bars are 48-inch round aluminum cross bars that allow for a multitude of attachments, such as kayak, ski, board, bike & cargo. Powered by 6-inch SeaSucker vacuum cups (4 up front and 2 in the rear), the Monkey Bars fit on just about any car with a roof. Have a wide or narrow roof? No worries, the vacuum cups can be moved to any position on the bar to ensure a perfect fit for any vehicle. Our folding option allows bars to break down from 48-inch to 24-inch for travel and storage.
2019 Model Bomber comes standard with our Universal Huske Fork Mount upgrades, 9mm plugs and quick release skewers. The Bomber is our 3-bike behemoth. It’s a fork-mount-style rack, with five of our powerful 210 lb pull-strength rated vacuum cups holding it onto your car’s roof, trunk or back glass. Three Rear Wheel Straps for securing the back tires are included. Incredibly easy to install, and removes in just seconds. Fits on virtually any car. Minimal assembly required. Specifications: - Holds 3 bicycles – up to 45 lbs each. - Made for roof top, trunk or hatchback attachment. - Attaches to metal, glass or fiberglass surfaces. - 3/4inch thick high-density polyethylene (HDPE) body for strength and durability. - Three heavy-duty fork mounts for 9mm dropouts. - Five 6-inch SeaSucker vacuum cups on body (210 pound pull-strength rated each). - Approx. 41-inch x 11-inch footprint. - Approx. 17 pounds What’s in the box: - Bomber 3-bike rack with standard 9mm fork mounts. - Three Rear Wheel Straps. - 5g Lube Tube for vacuum pump maintenance. - Spare SeaSucker vacuum pad and pump. - Crank Arm Strap.
2019 Komodo, the most beautiful bike rack in the world? We certainly think so. This road-bike-specific rack is machined out of solid aluminum so that each part fits with precision. Anodized in a variety of colors; Black, Silver, Aqua Blue, and Gold. This rack is designed for sports cars and convertibles – cars that don’t have a lot of open space to attach a rack, but this beauty can be used on any car. - Minimum footprint: 18-inch x 13-inch. - Tail folds up for compact storage. - Each of the four individual vacuum cups articulates so the rack makes a solid connection even with irregular mounting surfaces. - Sorry, mountain bike lovers, Seasucker doesn't have a version of the Komodo for you yet.
Quick and easy way to carry all types of watersports gear safely and securely. - Boards and boats are well protected during transport with these high density foam pads - Integrated no-slip grip on top of pads keeps loads in place - Long lasting performance with durable 600D nylon construction with UV resistance - Easy on and off with hook and loop closure design along bottom of pads - Ideal for carrying surfboards, SUPs, sailboards - To be used with Thule Locking Straps or Thule Load Straps Size - Medium = 20-inch - Long = 30-inch
Patented adapter design allows you to carry 15mm front suspension forks on existing Thule and most other fork-mounted bike carriers. - Patented adapter design allows use of current bike carrier - Durable materials and construction for added stability - Designed and manufactured in the USA - Welded steel body
$59.95 - $74.95
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.
Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).
Whether you're headed out for the weekend or a coast-to-coast odyssey, Thule's Outbound is the perfect travel companion. This soft-sided, weather-resistant rooftop accessory is spacious enough to carry your entire family's vacation gear, and tough enough to protect it out there on the open road. The laminate material is rugged and highly weather resistant, and the padded base protects your car's finish. Heavy-duty, double-stitched straps attach the cargo bag to your roof-rack crossbars or raised factory rails. Twin compression straps keep the load stable, minimize abrasion and noise, and improve aerodynamics. When you've gotten back home, the Interstate folds down for compact storage.
Fitting kit required for perfect fit of the roof rack to a specific car.
Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 108cm / 43 in
Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 118cm / 47 in
Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 135cm / 53 in
Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 150cm / 60 in
Fitting kit required for perfect fit of the roof rack to a specific car.
Heavy-duty aluminum load bars with a unique tri-slot design for fitting of multiple accessories. - Flexible tri-slot design allows use of a range of load accessories independently or in combination - Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 175cm = 69-inch - 200cm = 79-inch
Transport your bicycle quickly and safely with this lockable fork mounted carrier. Not compatible with Thule Aeroblade bars. - Easy-to-use stainless-steel skewer with oversized lever makes for secure loading and unloading - High-strength nylon composite head - Ratcheting wheel strap quickly secures back wheel to tray - Versatile design compatible with standard 9mm axles and most disc brakes. - Carries bikes with wheelbases up to 48" and tire widths up to 2.6". Even works with high profile rims - Carries 1 bike - 1 One-Key lock cylinder (sold separately) locks the bike to carrier and carrier to rack - Fits Thule rack systems or other round bars - Factory rack compatible with Thule Ride-On Adapter (sold separately)
$169.99 - $199.95
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
The Thule Circuit Fork Mount low-profile carrier is designed for those looking for security, convenience and aerodynamic styling. - AeroHead low-profile reinforced head combines aerodynamics, durability and style - SecureSkewer for fast loading and security w/ Thule’s One-Key lock cylinder (sold separately) - Tool-Free universal mounting makes it simple and easy to install - Integrated wheel cradle high-wall design provides protection and perfect fit beneath your wheel - Low profile aluminum tray made from corrosion-resistant aluminum to withstand the elements - Ratcheting wheel strap quickly secures back wheel to tray - Fits most factory supplied rack systems - Works with 15mm, 20mm and lefty forks with adapter (sold separately)
This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust resistant steel design. - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Thule’s Hull-a-port is a versatile, lockable kayak rack that carries one or two kayaks and folds flat when not in use. - Carry up to two kayaks made possible by the dual position design that transforms from a J-cradle to two boat stacker position - Universal mounting design fits all types of load bars quickly and easily - Folds flat when not in use - Fully assembled out of the box - Locks to load bars with Thule's One Key System Lock cylinders (sold separately) - Load straps with buckle bumpers and bow and stern tie downs included for one boat
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your 4-wheeler, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 108cm / 43 in
Page 1 of 2 Next page