The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. Your car's rails are fully protected thanks to the integrated rubber lining. You also get maximum rack strength and a custom fit from the tooless, rubber-coated steel straps.
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
This premium locking stand-up paddleboard (SUP) carrier delivers unmatched board security combined with a convenient, universal mounting design. - Exclusive, telescoping design delivers a custom fit for board widths up to 34" wide - Heavy-duty, steel reinforced webbing and spring loaded locking cam provide unsurpassed security for your boards - Soft, weather resistant padding protects boards during transit - 4 One-Key locks (included) 2 for locking strap assembly and 2 for Speedlink - Equipped with new Speed-Link mounting system for convenient, tool-free mounting to Thule rack systems, round bars and most factory racks - Two board capacity - Extra-long steel reinforced webbing and spring loaded locking cam provide unsurpassed security for your boards.
Add even more cargo space to your pickup with Thule's Xsporter Pro Multi-Height Aluminum Truck Rack. This system attaches to the sides of the pickup bed, creating a whole other level of gear storage and rack options. Superior aerodynamics reduce drag and improve your fuel efficiency while Thule's WindDiffuser technology offers super quiet on-the-road performance. All-aluminum construction resists rust and provides high strength, so you'll get a lifetime of hard use out of this rack. The system also includes four matching lock cylinders to secure your gear.
Whether you're headed out for the weekend or a coast-to-coast odyssey, Thule's Outbound is the perfect travel companion. This soft-sided, weather-resistant rooftop accessory is spacious enough to carry your entire family's vacation gear, and tough enough to protect it out there on the open road. The laminate material is rugged and highly weather resistant, and the padded base protects your car's finish. Heavy-duty, double-stitched straps attach the cargo bag to your roof-rack crossbars or raised factory rails. Twin compression straps keep the load stable, minimize abrasion and noise, and improve aerodynamics. When you've gotten back home, the Interstate folds down for compact storage.
Prioritizing the buffet of gear laid out on your living room floor can be a painstaking process. Should you take this? Will you need that? We have an easier solution: Throw the new Mini-Skinny on the roof and take all of it. With as much space as a comparable “fat” basket and 50-percent more usable crossbar space, you’ll be packing your gear, your friend’s gear and your friend’s dog’s gear. Half the width—Twice the fun. Offers fit options for the best of both worlds. Your worlds, whatever worlds they may be. Be it cycling, kayaking, or road tripping to the ski lodge. The Skinny’s distinct design provides the same load surface as other “fat” cargo racks while leaving 50% of usable crossbar space for, you know, whatever you need. -1 Bike Capacity (50lb bike, 9mm skewer) -Roof bar mounts come equipped with lock cores -Comes fully assembled -Matte Black Powder Finish -Fairing included with silver accents -Mounts to most factory & all aftermarket cross bars -1 Integrated bike mount with skewer -160 lb. capacity with bike & gear (always adhere to cross bars posted weight limits) -Max crossbar size-4.5” wide by 1.75” thick -2 piece design with option for Mini Skinny Extender to allow for more room -Two-Piece: 68” L x 23” W x 7” H
Sleek, aerodynamic ski rack for all types of skis and snowboards. - Holds skis and snowboards securely with ultra-soft rubber arms that grip without scratching the surfaces - Safely carries thicker modern skis and snowboards and reduces the carrier height when unloaded with an integrated vertical spring system - Easy to open and close while wearing gloves, thanks to an oversized push button - Added roof clearance for skis with tall bindings, thanks to included extension feet that raise the carrier - Fits Thule rack systems, round bars, and most factory racks with both T-Track and SpeedLink around-the-bar mounting options - Holds up to 4 pairs of skis or 2 snowboards Technical specifications - Dimensions: 24.4 x 2.8 x 3.9 inch - Loading width: 19.6-inch
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface - Holds thicker, taller loads with a higher vertical edge - Compatible with Yakima crossbars only - Works well when paired with Heavy Duty Straps (sold separately) - Set of 4 brackets
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Fitting kit required for perfect fit of the roof rack to a specific car.
$169.99 - $199.95
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
The first load-assist mount to handle both SUPs and kayaks makes loading and unloading heavy boats and boards a breeze. The lightweight mount tilts down more than two feet from the roof rack, takes on up to 45% of the boat’s weight, then helps gently raise it up to the top of the vehicle. Once loaded, it securely cradles your boat or boards for the ride. At only 21 pounds, it’s super lightweight but built burly enough to wrangle an 80 pound load. Product details: - Easily load and unload kayaks and boards at waist level at the side of the vehicle with the easy to use slide and tilt mechanism - 80 lb. boat and board capacity easily handles a large kayak or two boards - Universal mounting hardware fits most roof racks - Lightweight materials and construction don’t eat up roof’s carrying capacity - Tilts down a lengthy 26" from roof rack height - Provides 30-45% weight assistance (depending on boat width) - Felt-covered cradles flex to conform to hull for secure transport - Folds down flat to reduce drag and noise when not in use - All tie-down straps included - Locks to base rack with SKS Lock Cores for added security (sold separately)
$44.99 - $50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).
- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)
No matter where you go, Yakima's Raptor Aero keeps your bike securely in place. It's especially convenient because no bike disassembly is required. You'll love this if you have bolt-on or hard-to-remove wheels. Plus, the Raptor's padded jaws hold most bicycles tight yet won't scratch the paint. The Raptor comes with two ratcheting wheel straps and fits most crossbars right out of the box.
The LoadWarrior is the perfect accessory to boost the carrying capacity of your Yakima roof rack, plus it fits many other racks, too. Ingeniously, bike mounts attach directly to the basket to make carrying bikes easy, too. This cargo carrier is big enough to handle all your gear. The LoadWarrior even comes with a custom fairing that cuts wind drag and noise.
Got a Texas-sized SUV equipped with Yakima's MegaWarrior rooftop carrier? Then you may need Yakima's MegaWarrior Extension. It's constructed of heavy-duty, weather-resistant steel and it adds 22 inches and 40% more carrying capacity to Yakima's MegaWarrior rooftop basket (sold separately).
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Transport you kayak safely with these custom designed saddles that conform to the most popular hull shapes. - Integrated rubber pads protect the hull and help hold the kayak in place for transportation - Carries 1 kayak and requires 1 person to load and unload - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Maximize your kayak carrying ability with The stacker. It can hold up to 4 kayaks stacked on their side taking up the least amount of roof space. - Fold-down steel design with non-scratch outer coating - Quick on/off hardware ensures fast installation and removal - Optimally sized carrier leaves roof space for other Thule accessories - Carries up to 4 kayaks and requires 1 to 2 people to load and unload them - Includes straps to transport 2 kayaks - 1 to 4 carriers per vehicle - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Traverse fitting kit required for perfect fit of the roof rack to a specific car. Compatible with Thule Traverse 480 and 480R Feet only.
2019 Komodo, the most beautiful bike rack in the world? We certainly think so. This road-bike-specific rack is machined out of solid aluminum so that each part fits with precision. Anodized in a variety of colors; Black, Silver, Aqua Blue, and Gold. This rack is designed for sports cars and convertibles – cars that don’t have a lot of open space to attach a rack, but this beauty can be used on any car. - Minimum footprint: 18-inch x 13-inch. - Tail folds up for compact storage. - Each of the four individual vacuum cups articulates so the rack makes a solid connection even with irregular mounting surfaces. - Sorry, mountain bike lovers, Seasucker doesn't have a version of the Komodo for you yet.
Page 1 of 3 Next page