Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Handlebar Grips/Tape

Fizik Tempo Microtex Bondcush Soft
$29.99 - $34.99
Fi'zi:k's line of Tempo bar tapes are designed for an unparalleled performance. Bondcush is a layered mid-padding polymer foam that aids the absorption of road buzz. Bonded to a microtex outer layer this material blend is their chunkiest option that combines comfort, versatility, and durability, ideal to tackle all kind of roads. Soft touch is a matt-look, silky, moisture absorbing surface. - Bondcush construction 3mm thick - Soft touch
Fizik Vento Microtex Tacky
$34.99
Fi'zi:k's line of Vento tapes are race bred for ultimate control and reduced weight. Microtex is the thinnest option for pin-sharping handling and control. Its tacky finish aids a sticky nonslip surface with a raised texture for ultimate grip in every condition. - Microtex construction 2mm thick - Tacky touch
Hope Grip Doctor Bar End Plugs
$28.00 - $34.99
- Cnc-Machined aluminum bar-End plugs - Aluminum inner bolt and outer cap (Steel nut and rubber expanders) - Internal rubber expanders (2 Sizes in kit) fit 15mm-21Mm bar id - 34G
ODI Rogue Lock MTB Grips
$34.99
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
ODI Ruffian Lock MTB Grips
$29.95 - $34.99
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
ODI Ruffian Lock-On Grips
$29.95 - $34.99
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
ODI Troy Lee Designs Lock-On MTB Grip
$28.95 - $34.99
- Grooved channels prevent mud and water buildup - Overmolded flap gives added protection on outside clamp - Unique undercut pads provide slim comfortable feel with maximum grip - Custom flanged design provides hand support with more usable grip surface
Specialized BG Bar Phat w/Tape
$34.99
Specialized's BG Bar Phat w/Tape is a complete system that boasts advanced cushioning to keep you comfortable and protect your hands. It's comprised of adhesive gel pads and suede tape that's wrapped over them to provide the ultimate in comfort and control. In fact, tests have shown that the 4.5mm-thick pads reduce pressure by 50%!
Ergon GD1 Factory
$34.95
Ergon introduces the first MTB Gravity Grip with tapered grip shape (patent pend.) which features more damping in the outer area of the grip and a slim inner diameter. The unique rubber compound, manufactured in Germany, offers adhesive and rebound properties which have never been seen before in a bicycle grip. The grip feeling is soft, but still very defined and precise. The surface profile provides the hands with optimal grip and reduced gripping force. The slim inner stop additionally improves fast positioning of the hand. The high-strength aluminum inner clamp keeps the grip twist-proof, even on carbon handlebars. GD1 Slim Factory: With an inner-diameter of 29mm and outer-diameter of 30.5mm, the GD1 Slim Factory is recommended for riders with glove size Small / Medium (6.5 – 8.5) or riders who prefer a slim grip thickness. GD1 Regular Factory: With an inner-diameter of 30mm and outer-diameter of 32mm, the GD1 Factory has, in comparison to the GD1 Slim Factory, more damping characteristics and is recommended for riders with glove size L/XL (8.5 – 10.5) or riders who prefer a normal grip thickness. - Uses: downhill, freeride, gravity disciplines - Clamp: aluminium / CNC machined - Material: custom rubber compound
Ergon GE1 Evo
$34.95
The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
WTB Clydesdale Padloc Grip
$34.95
Big riders, fear no more: you can have comfort and a real grip for your hands. The Clydesdale’s generous 33mm profile made from our high end Contact Rubber pairs perfectly with our Padlock Relief, ensuring that big hands get high-end features too. - Compatible with PadLoc-ready bars only
WTB Commander Padloc Gripshift
$34.95
Jerome Clementz's grip of choice. Prominent lettering lets people know you’re in charge while Contact Rubber and the PadLoc Relief eliminate movement and provide an invitingly tactile feel. Ride hard and shift happy. - Compatible with PadLoc-ready bars only.
WTB Commander Padloc Gripshift
$34.95
Jerome Clementz's grip of choice. Prominent lettering lets people know you’re in charge while Contact Rubber and the PadLoc Relief eliminate movement and provide an invitingly tactile feel. Ride hard and shift happy. - Compatible with PadLoc-ready bars only.
WTB Thinline Padloc Grip
$34.95
A thin silhouette and opposing working edges provide irrefutable grip, even in the wet. The Pilot’s 28mm svelte shape provides a paired down though classic profile that features the PadLoc Relief so that even slim profiles get big comfort. - Compatible with PadLoc-ready bars only.
Chromag Clutch
$34.00
Dimples for the palm, waffle for the fingers. The Clutch grip combines traction and comfort. The waffle tread is specifically shaped to the fingers and oriented for traction in varied conditions. The diameter is narrow at 30mm with an extra wide format at 150mm overall. It features our special tacky compound based on 25a durometer. Weighing in at 100g /pair. Chromag grips feature our unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
Chromag Squareweave XL Grips
$34.00
• Larger diameter model for bigger hands, offers extra cushion • Same bulged center as the original Squareweave • Aluminum clamps secure the grip on both for twist-free performance
SRAM DoubleTap Lever Hoods
$24.99 - $33.00
Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.
ESI Fit XC Grips
$32.92 - $32.99
- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump - UV resistant and non-porous, they will not fade or harden - Non-slip grip compound that stays put even when wet - Fit XC: 13
Ergon GA2
$29.95 - $32.99
Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.
Ergon GD1
$32.99
Ergon's GD1 is a cost-conscious version of the GD1 Factory with GravityControl Rubber. This first Ergon gravity grip with tapered shape offers more damping in the outer area of the grip and a slim inner diameter. That means the grip feels soft but still very defined and precise. The surface profile provides greater grip with less gripping force to let you go harder, longer while maintaining tight control. The low-profile inner stop is a subtle reference that facilitates lightning-fast repositioning of the hand, and the high-strength aluminum inner clamp keeps the grip from twisting, even on carbon handlebars.
ODI SDG Lock-On Grips
$26.95 - $32.99
When two companies known for creating comfortable products collaborate, you know the results are going to be good. THE SDG GRIP FEATURES: - A Unique circular ribbed dampener which spread pressure across your palm while still providing excellent control - The front side of the grip features ergonomically ramped logos that act like hooks for your fingers and provide excellent traction when hanging off the rear of the bike - Lock-On Grip System = 100% Slip Free performance - Includes Snap Cap End Plugs - Color match to your SDG Duster seat
ODI Vans Lock-On MTB Grip
$26.95 - $32.99
Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications. - Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds - Provides exceptional feel and control in all conditions - Aluminum clamps secure the grip on both ends using a hex wrench
ODI Stay Strong Special Edition Ruffian BMX Lock-On Grips
$32.95
ODI has put together a Limited Edition Stay Strong version of the popular Ruffian BMX Lock-On Grip. Before becoming a multi-time X Games Gold Medalist, Stephen had already won just about every racing title in the UK. The special packaging and laser etched clamps help support Stephen's Stay Strong Foundation which was created after the super-star dirt jumper was left paralyzed when he crashed during the Baltimore Dew Tour stop in 2007. By purchasing a pair of these grips you are helping to support Stephen and his family on his road to recovery and you are showing love to a fellow BMX racer. - Diamondized pattern for optimal traction - Inlcudes custom Stay Strong clamps - Lock-On Grip System = 100% Slip-Free performance - Comes with a Stay Strong sticker - Includes Snap Cap End Plugs
Renthal Lock-On Grips
$32.95
- 4 compounds: medium, soft, super comfort (extra-soft) or Kevlar version with suspended Kevlar particles for the ultimate tacky yet durable grip - Machined 6082 aluminum collars lock tightly with integrated grip core - 30mm outer diameter knurled grip
Renthal Traction Lock-On Kevlar
$32.95
- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK
Renthal Traction Lock-On Medium
$32.95
- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK
Renthal Traction Lock-On Ultra Tacky
$32.95
- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK
ESI Fit CR Grips
$32.92
ESI's new fit grips are designed for a completely natural hand position on your handlebar. Our new design balances the pressure that your hands exert onto the handlebars, increasing bar control dramatically. Fit grips have three distinct areas: INNER - This area is the perfect step up for your hands to rest against for maximum bar control in turns. MIDDLE - This area is perfect for extra torque and powering while climbing. OUTER - This thickest area is for better hand comfort, especially while descending. Each area of the fit grip flows flawlessly into each other creating the perfect hand placement naturally. Your hands instantly feel comfort when they grasp their unique shape, as if they were exclusively molded for your hands.
ODI Aaron Gwin Lock-On MTB Grip
$31.95
- Developed in collaboration with 2x World Cup Champion Aaron Gwin - Ergonomic single clamp design with aluminum reinforced ends - Angled rib pattern matches the articulation points of your hand - Bonus pack includes Lock-On grips and v2.1 clamp
Chromag Basis Grips
$31.00
Chromag's Basis grip is designed for applications where the rider wants a firm, direct connection for performance in high intensity scenarios. The thin diameter grip with dimpled pattern is firm yet tacky and less prone to surface wear. Chromag grips feature their unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.