Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - For mounting the V3 power inside the seat tube using the water bottle screws - Not compatible with the V2 Power Unit
EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
Cane Creek's Thud Glove protects the moving parts of your Thud Buster seatpost from dirt and weather. Available in both short- and long-travel models.
$24.00 - $54.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost. - Rebuild bushing tools - LT arm screws (M4 x 20mm) - Saddle clamp bolt (M5 x 35mm) - Saddle clamp spherical washers - Saddle clamp adjustment knob
Replacement springs for Cane Creek Helm suspension forks.
Slamset top headsets are designed to keep the stack height low. - Hellbender bearings with improved seal structure
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
- CNC machined aluminum seatpost clamp weighing in at 19g
- Specially shaped composite material helps prevent chain derailment when shifting to inner ring - Split clamp design mounts to specific seat tube diameters, eliminating the need for a metal fitment clamp
- Aluminum straddle cable carrier for cantilever brake
- Dispenser of chromed ferrules - 5mm
Heavy duty bolt-on aluminum seatpost clamp.
$17.99 - $18.69
Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g
Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch
A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.
A perfect complement to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.
$30.00 - $37.99
What It Is Replacement hardware for ENVE carbon fiber seatposts. Who It's For Folks who need additional hardware for their ENVE seatposts. Why We Made It We get calls all the time for replacement hardware, so we made a little kit to make it easy for everyone.
The ENVE Clip-On Extensions share the same design features as the SES Aero Bar, but in a simple, function-first package that can be installed on any road bike with a 31.8mm clamp diameter clip-on-compatible handlebar. The extensions can be cut to a broad range of lengths to accommodate virtually any rider’s desired position. The extension itself can be cut to either a J-bend or S-bend shape. Because of the 31.8mm clamp, the clip-ons can achieve very wide pad spacing for broad-shouldered athletes seeking comfort for the long haul. The Clip-On receiver is made from 100% uni-directional carbon fiber, as are the pad carriers. For road riders looking to dabble in triathlon, the Clip-On Extensions provide a more aerodynamic position than road bars alone, without having to make a full commitment to a TT or Triathlon bike.
The SES Aero Clip-On bars integrate seamlessly into the SES Aero Road Bar to help riders achieve the most aerodynamic position possible on their road bikes. Combining the SES Aero Road Bar with Clip-Ons is an excellent solution for hilly time trials and triathlons where riding a road bike and saving weight offers the best chances for success. The Aero Clip-On Extensions are constructed from 100% uni-directional carbon fiber and cold forged aluminum. The clip-on bars share the same extensions as the SES Aero TT Bar and may be cut to three unique styles including J-bend, S-bend, and Straight. You can also run shifters at the end of the extensions, if desired. The carbon pad carriers allow for a smooth, vibration-damped ride with a reversible 8 hole pattern that allows perfect pad positioning. The pads are compression-molded neoprene and provide a comfortable arm rest and slip-free surface.
Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.
- Made of 6061-T6 alloy - Extruded fastener parts - Internal Diameter: 19.6mm - With 26.0mm shims
$9.99 - $15.99
Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.