Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Surly Straggler Frame Replacement Dropout Screws
$6.00
Replacement dropout screws for the Surly Straggler. - Bolt length: 40mm
Surly Tuggnut/Snuggnut Slider
$6.00
- Replacement slider for the Surly Tuggnut and Snuggnut
Surly Tuggnut/Snuggnut Stainless Steel Thumb Screw
$6.00
- Replacement thumb screw for the Surly Tuggnut/Snuggnut
Zipp End Plug Cable Guide Vuka Extension
$6.00
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
Zipp Service Course Bar End Plugs
$6.00
ZIPP Service Course Bar End Plugs, Qty 2.
Bontrager Jagwire Downtube Barrel Adjuster (Pair)
$6.50
• For use with externally routed road frames
Specialized Body Geometry Fit Top Cap
$6.50
- Off-setting shims to use with Specialized Multi-position Stems
Surly Bearing Pre-Load Cap Non-Drive Crank Bolt
$6.50
Surly bearing adjust caps for Mr. Whirly and OD
SRAM Brake Pad Spreader Springs
$6.60 - $6.72
Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes
Spank Headset Spacer Kit
$6.90
We won't blame you for attention to detail. In fact, Spank's got your back. These headset spacer kits are available in 8 popular colors, and come with 3 rings in incremental sizes, to make your next cockpit set up a thing of ease and beauty. - Material: Alloy - Sizes (mm): 3 / 6 / 12 - Diameter: 1 1/8" (28.6mm) - Finish: Brushed Anodized
Problem Solvers 10mm Brake Adjusting Barrel (pair)
$6.99
Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.
Problem Solvers SpaceOut Set
$6.99
The Problem Solvers SpaceOuts Set includes 2 5mm hex bolts and spacers that let you add space between your bottle cage and frame. This comes in handy on frames with clamp-on front derailleurs and tight clearance for cage mounting.
Thomson Collar Bolt Kit
$6.99
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
Wheels Manufacturing Inc. Chainstay Protector - Wide
$6.99
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Problem Solvers Bubs
$7.00
Problem Solvers Bubs Frame Plugs to fill M5 bolt holes in your frame and fork. Replace water bottle and rack mount bolts for a clean look while keeping grit and moisture out of the inside of your frame. Protect your frame bag fabric from abrasion, or just take a little weight off your bike. - Fits most frame and fork M5 bolt holes - Shaves weight, saves threads, looks sleek - 10mm length - Rubber construction - Bag of 10
Shimano Dura-Ace FD-R9100 Front Derailleur Support Bolt and Plates
$7.00
This is a replacement hardware kit for Dura-Ace FD-R9100 Front Derailleurs. It includes support bolt and plates.
Shimano SB77 Bar-End Shift Lever Segment Unit
$7.00
This replacement Shimano bar-end shifter segment unit is the expansion core that goes inside the handlebar. These can become damaged in a crash or during installation or uninstallation.
Zipp Evo Extension Bezel eTap Clics
$7.00
- Plastic bar end plug pair for 22.2mm extensions
Cane Creek Thudbuster LT Elastomer
$7.50 - $9.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Cane Creek Shock Spring Converter Clip
$7.75
- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
Bontrager Race Lite Ergo Bar Ends IsoZone Bar Adapters
$7.99
Key features: - Adapter to fit Bontrager Race Lite Ergo Bar Ends to Bontrager Satellite Plus IsoZone Handlebars - Only compatible with the Bontrager Satellite Plus IsoZone Handlebar - For most other bar ends, use: Bontrager Satellite Plus IsoZone Bar End Adapter
Dimension Seatpost Binder Bolt
$7.99 - $8.79
Dimension Seatpost Binder Bolts - 16g
FSA Carbon SL Headset Spacers
$7.99
- Super light carbon spacers for tuning stem height - Spacers are internally weight relieved to drop a few extra grams
FSA Microspacer Headset Spacers
$7.99
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
Odyssey Gyro G3 Upper Cables
$7.99 - $9.99
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
Problem Solvers Cable Pulley
$7.99
The Problem Solvers Cable Pulley is the correct replacement for their Cross Clamp pulley (Cross Clamp sold separately) and it will also work on most frames that have a mount for a pulley. You get the aluminum pulley and the brass bushing.
Problem Solvers Standard Top Cap
$7.99 - $15.00
The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.
SRAM Steel Chainring Bolt Kit
$7.99
- Length: 8 mm, 5.5 mm - Material: Steel - Type: Hex - Set of 4 x 2
RockShox Reverb Hose Barb Remote
$8.00
Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb
Wheels Manufacturing Inc. Front Derailleur Spacer 1-1/4-inch
$8.24
This Wheels Manufacturing spacer allows you to mount a 1-1/4-inch clamp front derailleur on a 1-1/8-inch seat tube.
Wheels Manufacturing Inc. 1/4-inch Grade 25 Loose Ball Bearings - Tub of 25
$8.25
Tub of 25 Grade 25, 1/4" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 25 per tub
Wheels Manufacturing Inc. 3/16-inch Grade 25 Loose Ball Bearings - Tub of 25
$8.25
Tub of 25 Grade 25, 3/16" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 25 per tub
Wheels Manufacturing Inc. Front Derailleur Spacer 1-1/8-inch
$8.25
This Wheels Manufacturing Shim lets you mount a 1-1/8-inch clamp front derailleur on a 1-inch seat tube.
Ritchey Di2 Internal Seatpost Battery Mount
$8.45 - $9.95
- Securely hide your Di2 Battery within your seatpost - Di2 battery sold separately
Ritchey WCS Carbon Headset Spacers 1-1/8-inch 10mm
$8.95
Carbon head set spacers for 1-1/8" steerer. - For 1-1/8" steerer - 10mm thick - 2pcs per bag - 33mm OD
ESI Silicone Tape
$8.99
Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.
FSA MegaExo Left Crank Bolt for 19mm MegaExo Cranks
$8.99
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt
Jagwire Nokon Slick-Luber Liner Kit
$8.99
Housing liner provides an extra line of protection between cables and housing. - Slick-Lube housing liner reduces friction to improve braking feel - Compatible with Nokon brand cable housing systems
Lizard Skins Frame Shock Boot
$8.99
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
Problem Solvers Brake Mounting Nut
$8.99 - $13.15
The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.
Problem Solvers Clamp-On Cable Hanger
$8.99 - $9.99
The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.
TruVativ Steel Chainring Bolt Set
$8.99
- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex
Cane Creek DB Volume Reduction Spacer Kit
$9.00
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve
Cane Creek Thudbuster ST Elastomer
$9.00
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
Shimano 10-Speed Chain Pins
$9.00
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
Shimano 9-Speed Chain Pins
$9.00
- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack
Shimano Deore XT M8000-SGS Rear Derailleur Cage Plate
$9.00
These are replacement Shimano Rear Derailleur Cage Plates for Deore XT RD-M8000-SGS derailleurs. If these plates are bent or damaged, shifting performance deteriorates significantly leading to skipping chains, mis-shifts, and ghost shifting. Restore the smooth, precise shifting you've come to expect from your XT derailleur. *Be sure to choose the correct plate if you only need the inner or the outer plate.
Zipp Vuka Alumina Riser Bolt Kit
$9.75
Bolt kit for Vuka Alumina Riser
MRP Replacement Rollers
$9.95
- Replacement roller kits for mrp guide systems (includes bearings and hardware) - Lightweight version averages 20g less per roller (with hardware)
Ritchey Fork Crown Race for 1-1/8-inch straight steerer ZS44/30
$9.95
Fork crown race for genuine Ritchey headsets. - For cartridge type headsets with a 45° taper - Alloy - ZS44/30
Ritchey Replacement Stem Bolts: 7 Pieces for Superlogic C260
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Replacement T20 bolts for Super Logic stems - Includes T20-M4x15L x 4pcs & T20-M4x18L x 3pcs - Bit Size: Torx 20 - Thread Pitch: M4 - Length: 18mm (x3), 15mm (x4)
Ritchey WCS Replacement Stem Bolts: C220 and Matrix C220 Stem
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Bit Size: 4mm - Thread Pitch: M5 - Length: 4x 16mm, 2x 18mm
Ritchey WCS Replacement Stem Bolts: C260 Stem
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Bit Size: Torx 20 - Thread Pitch: M4 - Length: 15mm
Ritchey WCS Replacement Stem Bolts: Classic C220 Stem
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Bit Size: 4mm - Thread Pitch: M5 - Length: 4x 16mm, 2x 18mm
Thomson Stem Cap
$9.95
- Machined aluminum with three Thomson logos circling the cap
Thomson X2 Stem Replacement Clamp
$9.95
Thomson Faceplates are compatible only with Thomson stems. Compatible only with X2 stems
Thomson X4 Stem Replacement Clamps
$9.95
Thomson Faceplates are compatible only with Thomson stems. Compatible only with X4 stems
Wheels Manufacturing Inc. 5/32-inch Grade 25 Loose Ball Bearings - Tub of 75
$9.95
Tub of 75 Grade 25, 5/32" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 75 per tub
Wheels Manufacturing Inc. 7/32-inch Grade 25 Loose Ball Bearings - Tub of 25
$9.95
Tub of 25 Grade 25, 7/32" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 25 per tub