Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Bontrager Rear Mount Adjustable Kickstand
$24.99
Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware
Bontrager Speed Concept Seatpost Cap
$49.99
Bontrager's Speed Concept Seatpost Cap lets you get your position dialed for your next triathlon or time trial. Two different saddle offsets and widely a adjustable saddle angle means you'll find the perfect fit for your race against the clock.
Bontrager Race Lite Clip-On Aerobars S-Bend
$119.99
In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.
Bontrager Speed Concept Mono Extension
$149.99 - $274.99
The OCLV Carbon Mono Bar Extension delivers an even more aerodynamic leading edge to Trek's drag-defying Speed Concept (Gen 2). These straight and S-Bend extensions are designed to be cut to length and have internal routing for standard or Di2 cables. - Designed specifically for 2014 Speed Concept - OCLV Carbon fiber mono extensions - Straight and S-Bend extensions are designed to be cut to length - Internally-routed for Di2 and standard cables - Designed to accept 22.2mm standard extensions
Campagnolo Disk Brake Mineral Oil
$15.00 - $35.00
Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Will not damage frame finishes - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin
Campagnolo External EPS V2 Power Unit Mount
$16.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Not compatible with the V3 Power Unit - Required for external mounting of V2 Power Unit
Campagnolo EPS Power Cable for Charger - US Standard
$20.00
- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries
Campagnolo EPS V3 Power Unit Seatpost Mount
$20.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Fits external seat post diameters from 30.9 - 31.6mm - Not compatible with the V2 Power Unit
Campagnolo H11 Disc Caliper Mounting Screws
$20.00
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
Campagnolo EPS V3 Power Unit Water Bottle Mount
$35.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - For mounting the V3 power inside the seat tube using the water bottle screws - Not compatible with the V2 Power Unit
Campagnolo Chorus/Athena EPS Under BB Cable Kit
$45.00
EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Allows for the mounting of the EPS Power Unit beneath the bottom bracket - Only compatible with Chorus and Athena EPS systems
Campagnolo EPS Cable Guide Magnet
$63.90 - $70.00
EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet
Campagnolo EPS Front Derailleur Stiffener
$82.00
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Campagnolo Chorus EPS Interface
$125.00
In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Weathertight, o-ring sealed connectors - Waterproof to 1m for 30 minutes (IP67 Rated) - Compatible only with the Chorus Power Unit
Campagnolo Super Record/Record EPS V3 Interface Unit
$180.00
In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - New shape with LED indicators on 3 sides - Battery charges through the Interface Unit, no more need to drill a charging port hole in the bicycle frame - Contains a wireless module allowing for connection to PCs, smartphones, tablets, etc., through ANT+ and Bluetooth Low Energy (BLE). Requires the use of Android 4.3 or newer, or iOS 8 or newer - Only compatible with Campagnolo Super Record and Record V3 Power Unit - Waterproof to 1m for 30 minutes (IP67 Rated) - Weathertight, o-ring sealed connectors - See PDF for complete details on the V3 app and customization
Campagnolo Record EPS V2 Interface Unit
$200.00
Campagnolo's Record EPS V2 Interface Unit is like a translator, the vital piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.
Campagnolo Chorus EPS V2 Power Unit
$365.00
The EPS Power Unit is the brain of the entire EPS system. The power unit input/output gate charges the battery and updates the firmware. The unit checks and manages the battery pack, interacts with the interface, drives the front and rear derailleurs, and displays system anomalies through an acoustic buzzer and RGD light. EPS V2 Power Units are for internal battery applications, under bottom bracket, or under chain stay mounting options and require the specific EPS V2 Interface. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1 meter for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F
Cane Creek 10-Series Interlok Headset Spacer
$4.99
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Cane Creek Thudbuster LT Elastomer
$7.50 - $9.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Cane Creek Shock Spring Converter Clip
$7.75
- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
Cane Creek DB Volume Reduction Spacer Kit
$9.00
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve
Cane Creek Thudbuster ST Elastomer
$9.00
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
Cane Creek 40-Series Headset Top Cover
$14.00 - $17.99
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height: 9mm
Cane Creek Thud Glove
$18.00
Cane Creek's Thud Glove protects the moving parts of your Thud Buster seatpost from dirt and weather. Available in both short- and long-travel models.
Cane Creek Rear Shock Hardware
$19.50 - $26.50
Mounting hardware fits a variety of Cane Creek shocks.
Cane Creek Hellbender Headset Bearing
$24.00 - $54.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Cane Creek 110-Series Headset Top Cover
$30.00
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height = 9mm
Cane Creek 3G Thudbuster Rebuild Parts and Tool Kit
$39.00
Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost. - Rebuild bushing tools - LT arm screws (M4 x 20mm) - Saddle clamp bolt (M5 x 35mm) - Saddle clamp spherical washers - Saddle clamp adjustment knob
Cane Creek Helm Coil Spring
$40.00
Replacement springs for Cane Creek Helm suspension forks.
Cane Creek Slamset Headset Top
$49.00
Slamset top headsets are designed to keep the stack height low. - Hellbender bearings with improved seal structure
Cane Creek OPT Climb Switch Handlebar Remote
$54.99
The OPT remote allows instant engagement of Cane Creek's Climb Switch on Double Barrel rear shocks, giving the rider precise control of traction and climbing feel. - Hard anodized for durability - Requires brake cable and housing for installation - Bottom mount for below bar engagement or top mount for above bar - Compatible with DBinline, DBAir IL, and DBCoil IL shocks only
Cane Creek VALT Spring
$60.00
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Chromag NQR Seat Clamp
$27.00 - $27.99
- CNC machined aluminum seatpost clamp weighing in at 19g
Chromag Seat QR
$50.00
- Brass cam bushing offers smooth lever action and secure clamping force - CNC machined aluminum collar and lever with 6mm bolt
Deda Elementi Dog Fang Anti-Chaindrop Device
$13.49 - $22.00
- Specially shaped composite material helps prevent chain derailment when shifting to inner ring - Split clamp design mounts to specific seat tube diameters, eliminating the need for a metal fitment clamp
Delta Stem Raiser
$29.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
Delta Stem Raiser
$39.99
- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation
Dia-Compe Ferrules
$35.01 - $38.19
- Dispenser of chromed ferrules
Dimension Anodized Bolt M5x.8 16mm
$1.25
Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually
Dimension Seatpost Binder Bolt
$7.99 - $8.79
Dimension Seatpost Binder Bolts - 16g
Dimension Seatpost Clamp
$17.99 - $18.69
Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g
Dimension Quill-To-Threadless Steerer Adapter
$29.99
Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch
Dimension Steerer Extender
$35.99 - $43.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
ENVE Seatpost Battery Plug
$20.00
A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.
ENVE Fork Compression Plug
$25.00
A perfect complement to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.
ENVE Road Bar Clip-on Extensions
$350.00
The ENVE Clip-On Extensions share the same design features as the SES Aero Bar, but in a simple, function-first package that can be installed on any road bike with a 31.8mm clamp diameter clip-on-compatible handlebar. The extensions can be cut to a broad range of lengths to accommodate virtually any rider’s desired position. The extension itself can be cut to either a J-bend or S-bend shape. Because of the 31.8mm clamp, the clip-ons can achieve very wide pad spacing for broad-shouldered athletes seeking comfort for the long haul. The Clip-On receiver is made from 100% uni-directional carbon fiber, as are the pad carriers. For road riders looking to dabble in triathlon, the Clip-On Extensions provide a more aerodynamic position than road bars alone, without having to make a full commitment to a TT or Triathlon bike.
ENVE SES Aero Handlebar Clip-on Extensions
$350.00
The SES Aero Clip-On bars integrate seamlessly into the SES Aero Road Bar to help riders achieve the most aerodynamic position possible on their road bikes. Combining the SES Aero Road Bar with Clip-Ons is an excellent solution for hilly time trials and triathlons where riding a road bike and saving weight offers the best chances for success. The Aero Clip-On Extensions are constructed from 100% uni-directional carbon fiber and cold forged aluminum. The clip-on bars share the same extensions as the SES Aero TT Bar and may be cut to three unique styles including J-bend, S-bend, and Straight. You can also run shifters at the end of the extensions, if desired. The carbon pad carriers allow for a smooth, vibration-damped ride with a reversible 8 hole pattern that allows perfect pad positioning. The pads are compression-molded neoprene and provide a comfortable arm rest and slip-free surface.
ESI Silicone Tape
$8.99
Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.
Easton Bottom Bracket Spacers
$12.99
Spacers for Easton bottom brackets.
Eclypse Black-Out Race Seatpost Collar
$10.99
- CNC machined 6066-T6 alloy - Ultra light double alloy nut design - 14mm clamp height
Eclypse Black-Out Aero Bar With Ski Bend Extensions
$79.99
- Made of 6061-T6 alloy - Extruded fastener parts - Internal Diameter: 19.6mm - With 26.0mm shims
Eclypse Black-Out Aero Bar With S Bend Extensions
$99.99
- 6061-T6 tubular aluminum construction - 31.8mm handlebar clamp - 1.75 inch rise from bar for optimum position - Independent arm rest and bar adjustment - Arm rest pad set included - Weight: 445g
Electra Townie Quick-Release Seatpost Collar
$9.99 - $15.99
Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.
Electra Delivery 3i Wood Tank Plate
$29.99
Make sure your bike is looking fresh with Electra's Delivery 3i Wood Tank Plate. The clear polish accentuates the natural wood grain and protects it from weather so your tank plate looks great for years!
Enduro Wiper And Seal Kits
$25.00 - $28.00
- Blue polyurethane upgrade dust wipers and oil seals - Dual lip offers improved seal with lower stiction - Fox 32mm and 36mm kits include wipers, oil seals, crush washers, and foam rings - Fox 40mm kits include wipers and seals
Evo Aluminum Headset Spacers
$9.99
- CNC machined aluminum alloy - Fits 26.8mm (1-1/8-inch) steer tube
Evo E-Force XL Seatpost Collar
$11.99
- CNC machined 6061-T6 alloy - Extra long 72mm clamping lever - Provides extra leverage - 13mm clamp height
Evo Edge Supra Mirror
$19.99
Be safe out there. Evo's Edge Supra Mirror mounts to drop bars for rear visibility. The screw-in plug stays secure and the adjustable angle gives you a good view. It's perfect for commuters and riders who like to see what's going on at the back of the pack.
Evo Edge Road Bike Mirror
$24.99
Be safe out there. Evo's Edge Road Bike Mirror mounts to drop bars for rear visibility, perfect for commuters and riders who like to see what's going on at the back of the pack.
Page 1 of 15 Next page