Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

SRAM Guide Ultimate Hose Kit
$45.00
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
Campagnolo H11 Disc Caliper Mounting Screws
$20.00
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
SRAM All-Mountain Carbon Chainring Guard
$92.00 - $100.00
SRAM X01 Chainring Guards - Material: Polycarbonate - Chainring BCD: 94 - Mount Type: Chainring
Manitou Dorado Service Kit
$42.00
- Annual service kit for all Dorado models - Kit includes all wear parts, O-rings, oil seals and wipers for (1) Complete service
RockShox Post Clamp Kit, Reverb/Reverb Stealth B1(2017)
$20.00
RockShox Reverb External Parts include upper/lower clamp plates only
Zipp End Plug Cable Guide Vuka Extension
$6.00
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
Zipp CeramicSpeed Bearing Kit: Modified For 77 Front Hub and 177 Rear Free Hub
$276.00
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings
Eclypse Black-Out Race Seatpost Collar
$10.99
- CNC machined 6066-T6 alloy - Ultra light double alloy nut design - 14mm clamp height
Enduro Wiper And Seal Kits
$25.00 - $29.00
- Blue polyurethane upgrade dust wipers and oil seals - Dual lip offers improved seal with lower stiction - Fox 32mm and 36mm kits include wipers, oil seals, crush washers, and foam rings - Fox 40mm kits include wipers and seals
SRAM RED eTap BlipBox
$330.00
SRAM's BlipBox is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position. - BlipBox mount included - Replaces standard drop bar shift levers - Limitless aero configurations - Up to two positions per side - Fits a standard Garmin mount or the included mount
All-City Cable Clamps
$12.00
Snap-on brake cable guides for bikes that don't have any. - Steel cable housing guide for 1-1/8" top tubes - Snaps on; no bolts - Set of 3 clamps
Spank Headset Spacer Kit
$6.90
We won't blame you for attention to detail. In fact, Spank's got your back. These headset spacer kits are available in 8 popular colors, and come with 3 rings in incremental sizes, to make your next cockpit set up a thing of ease and beauty. - Material: Alloy - Sizes (mm): 3 / 6 / 12 - Diameter: 1 1/8" (28.6mm) - Finish: Brushed Anodized
RockShox Reverb Hydraulic Hose Kit w/ Connectamajig
$24.00
This is a Connectamajig hose kit for replacing your Reverb's hydraulic line. - Fits all generations of Reverb Stealth - Includes Connectamajig, new hose, new strain relief, new barb - 2000mm hose
RockShox Reverb Main Piston and Shaft
$34.00
RockShox Reverb replacement main piston and shaft to freshen up or repair your beloved Reverb. - Fits A1-A2 generation externally routed Reverb seatposts - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle. - For "A2" designated posts, 2013-2016 - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle.
RockShox Reverb Poppet Kit A1
$17.00
RockShox Reverb Internals - Use with A1 upper assembly and A1 remote only
Thomson Seatpost Bolt Kit
$5.99
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
Zipp Vuka Clip Armrest Pad Kit
$26.00
Zipp Speed Weaponry Aero Bar Parts - Includes 2 replacement pads and Velcro - May be used with the older Vuka Clip and Vuka Aero - Elbow pads embossed with Zipp brand logo
Cane Creek Rear Shock Hardware
$19.50 - $26.50
Mounting hardware fits a variety of Cane Creek shocks.
FSA Aluminum Headset Stack Spacers
$4.99
Dial in the perfect cockpit by spacing your stem with these lightweight, easy-to-install Aluminum Headset Stack Spacers from FSA.
Tacx Standard Jockey Wheels, SRAM
$16.99
These replacement jockey wheels include standard ball bearings and are durable, run smoothly, and are maintenance-free. Suitable for SRAM road and mountain bike derailleurs.
Problem Solvers 1-1/8-inch Headset Spacers
$3.50 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Thomson Seatpost Collar
$29.95 - $40.99
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
Problem Solvers Head Tube Reducers
$19.99 - $46.65
The Problem Solvers Head Tube Reducers resize your head tube to accommodate different size forks. These fine aluminum reducers are designed for traditional, external-cup headsets. Please contact us for any questions about compatibility with your bicycle.
Problem Solvers Seatpost Shim
$9.99 - $12.50
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
Zipp Service Course Bar End Plugs
$6.00
ZIPP Service Course Bar End Plugs, Qty 2.
Pro Aluminum Headset Spacer Kit
$17.99
• Supplied as set of 5 pcs (2x2mm, 1x5mm, 1x10mm and 1x20mm) • Available in 1/8 inch • Color: Black
Specialized S-Works Standard Seatpost Collar
$16.00
- Aluminum collars feature angled slots. - S-Works 32.6mm standard collar (14mm tall) fits all Specialized road frames with an aluminum outer seat tube sleeve - S-Works 31.8mm standard collar (14mm tall) fits all Specialized road frames with a 31.8mm outer seat tube diameter
K-Edge Road Braze-on Chain Catcher
$19.99 - $24.99
The K-EDGE Road Chain Catcher is THE Original Chain Catcher used by professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The K-EDGE chain catcher is a simple add-on component machined to precision which improves the overall function of your drive train and protects your valuable frame from dropped chains. - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third party braze-on adapter clamps - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
MRP Replacement Rollers
$9.95
- Replacement roller kits for mrp guide systems (includes bearings and hardware) - Lightweight version averages 20g less per roller (with hardware)
Salsa Lock-on Collars
$10.00
- Open end allows use of bar ends, also while looking good - Compatible only with Salsa Backcountry Grips
Salsa Lock-on Collars Closed-End
$15.00
- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair
Salsa Cane Creek +3mm 40mm Lower Race Custom for Salsa
$12.00
Custom Cane Creek lower race for Salsa.
Specialized Custom Snap-On Chainstay Protector
$15.00
- Durable custom-molded plastic guard - Co-molded rubber exterior to help quiet chain-slap noise - Easy installation and removal
Hayes Master Cylinder Body/Lever Parts
$10.50 - $17.62
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
ESI Silicone Tape
$8.99
Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.
Tacx Ceramic Jockey Wheels, SRAM
$47.99
Get the most out of a small investment! These replacement jockey wheels use ceramic ball bearings and are made of wear-resistant plastic with a very long service life. This produces a high-efficiency jockey wheel that runs very smoothly. Suitable for road and mountain bikes (SRAM).
Ritchey WCS 4-Axis Stem Face Plate Replacement
$11.95
Replacement faceplates for Ritchey stems. - Replacement faceplate for WCS 4-Axis stems
Ritchey WCS Alloy 1-Bolt Seatpost Clamp 7 x 7mm Rails
$13.95
Saddle Rail Clamp outer-pieces to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions. - To retrofit WCS One-Bolt Alloy Seatpost - Material: 7050 alloy - For 7x7mm saddle rail size
Wheels Manufacturing Inc. Derailleur Hanger 333
$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces BMC Hanger #52 (Part #300696) - Attaches to frame with (1) M3x16 flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 343
$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Raleigh part #99-45-0057 - Attaches to frame with (1) M8 chainbolt (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 344
$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Raleigh/iZip part #99-45-0049 - Attaches to frame with (2) M4x8 Flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. 31.8 – 26.0 Handlebar Shim
$12.00
Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black
Zipp Vuka Evo Aerobar Extensions
$147.00
Carbon Vuka Extensions give you all the options needed to optimize your aero position. Available in four styles. Straight gets you low for that aggressive aero position. Ski-Tip places you in a position for speed as well as long-haul comfort. The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. Race Vuka Shift, features the Race bend, moving the shifter closer to the rider’s hand by almost an inch by mounting the shifter directly onto the extension. This allows the rider to shift easily from their aerodynamic tuck. The Race Vuka Shift is compatible with SRAM 900 TT, 500 TT, R2C Aero Shifter and Zipp R2C shifters only. - Compatible with Vuka Clip and all 22.2 systems - Internal cable routing
Specialized Ohlins 8.25-Inch Enduro Light Spring
$95.00
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).
Specialized Ohlins 9.5-Inch Demo Light Spring
$95.00
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).
SKS Chainbow
$27.99
All-round protection. The Chainbow chain protector is made of impact-resistant black plastic and aluminum, and offer perfect protection from the chain. Thanks to the telescoping function and the variable positioning of the angle bracket, this chain protector is adaptable to many frame geometries and component combinations.
Problem Solvers SpaceOut Set
$6.99
The Problem Solvers SpaceOuts Set includes 2 5mm hex bolts and spacers that let you add space between your bottle cage and frame. This comes in handy on frames with clamp-on front derailleurs and tight clearance for cage mounting.
Problem Solvers Micro-Adjustable Headset Spacer
$21.99
The Problem Solvers Micro-Adjustable Headset Spacer goes on the fork (it requires 10mm of clearance on the steerer) and locks in place to retain your headset bearing adjustment. This makes it possible to run your fork and headset without a star nut or compression plug. This 2-part threaded component is made of CNC-machined aluminum with a small bolt for tightening, so it's light and durable.
Problem Solvers Seatpost Clamp with Rack Mounts
$11.99 - $14.99
The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.
Problem Solvers Self-Extracting Crank Bolts
$14.99
The Problem Solvers Self-Extracting Crank Bolts take the place of the existing bolts in Shimano/Octalink, Race Face ISIS, and M15-compatible cranksets to let you remove your crankarms with only an 8mm Allen wrench instead of special tools. A 10mm Allen wrench (sold separately) is used to install these fine aluminum self-extractors.
Electra Townie Quick-Release Seatpost Collar
$9.99 - $15.99
Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.
Salsa Fat Flip-Off Stainless Steel Quick-Release Skewer Pair
$70.00
Stylish and strong, Salsa's Fat Flip-Off Stainless Steel Quick-Release Skewers are a nice finishing touch on any fat bike. The shaft is constructed from stainless steel, which makes for a sturdy, durable, lightweight pair of skewers.
Bontrager Rotary Head Seatpost Saddle Clamps
$14.99 - $16.99
Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands
Pro Missile Evo Bridge Kit
$139.99 - $149.99
- Riser set including 10 x 1cm spacers and bridge for stability - Includes required bolts - Aluminum aerodynamic construction that meets UCI requirements - Color: SB black - Weight: from 40g
Hope Fatsno QR Rear Skewer
$28.75 - $28.99
Laser-etched aluminum quick-release skewer for rear Hope Fatsno hubs. • 170 or 190mm
Bontrager Race Lite Clip-On Aerobars S-Bend
$119.99
In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.
Hope QR Rear Skewer
$28.75
Laser etched, anodized T6 aluminium quick-release skewers.
Problem Solvers Double Chainring Bolts Dual Hex Head - 10mm
$14.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 10mm wide. This is the right size for most double-chainring setups with a bashguard. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
Problem Solvers Chain Spy
$34.99 - $39.99
Problem Solvers' Chain Spy is a chain retention device that keeps a watchful eye on your chain while you focus on blasting along the path ahead. Choose between the 31.8mm clamp model, or the Direct Mount model, depending on your bike's needs.
Profile Design Venturi Arm Rest Kit
$25.99
Profile Design’s Venturi Arm Rest Kit is the correct model for your Profile Design Century Aerobars (sold separately). The foam arm pads have adhesive backing and the kit includes all necessary hardware.
Page 1 of 15 Next page