Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Velox Jantex Adhesive Tubular Rim Tape
$9.95
- High performance adhesive tape, a great pairing with Velox Cement - Each roll is usually adequate for gluing two tubular tires - Protects tube from spoke/nipple/rim puncture
Muc-Off No Puncture Hassle Tubeless Sealant
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
Trek Bolt-On Skewers
$9.99
- Skewer Trek QR-18 100mm Bolt-On Front Black - Skewer Trek QR-18 135mm Bolt-On Rear Black
Vittoria Special Rim Tape
$9.99
Vittoria's Special Rim Tape stays put to reliably protect your tube from spoke holes inside the rim. Sold as a pair to tape two wheels.
Shimano Alfine SG-S700 Left Hand Cone with Dust Cap
$10.00
If the bearings are getting rough on your Shimano Internally Geared hub, it could simply be a matter of replacing a pitted cone and repacking the bearing with grease. - Fits left side of Alfine SG-S700 hubs
Surly Ultra New Hub Stainless Knurled Axle End Cap
$10.00
- Replacement part for Surly hubs
Surly Ultra New Hub Stainless Knurled Bolt Cap
$10.00
- Replacement part for Surly hubs
Wheels Manufacturing Inc. CN-R024 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 15mm - 1 cone per bag Note: O-ring / seal not included. Check the seal groove closely. This cone has a narrower groove than cone CN-R002. COMPATIBLE HUBS: - 105 FH-5700, 9 speed (right side cone) - 105 SC 1051, 7 Speed Rear - RX100 A551, 8 Speed Rear - RSX 410, 7 Speed Rear - Deore LX M550, 7 Speed Rear - Deore Mtn LX M550, 7 Speed Rear
Wheels Manufacturing Inc. CN-R036 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm - Length: 10.5mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Road 400 CX Front - HB-RM40 Front - Shimano HB-RM40 Front - HB-RA50 Front
Wheels Manufacturing Inc. CN-R040 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm - Length: 10.6mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Shimano HB-C201 Front - 105 HB-1050 Front - Deore LX/Mtn LX Front - STX HB-MC32/30 Front - Shimano HB-A410, HB-A416 Front
Wheels Manufacturing Inc. CN-R055 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - 22mm metal dust seal is pressed on cone - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 11.4mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Nexave HB-T400 Front - Shimano Deore HB-M510 Front - STX HB-MC32/30 Front - STX Parallax Front
Wheels Manufacturing Inc. CN-R083 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R085 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 10mm x 26, rear hub - Compatible with 10mm x 26 axle - Cone Wrench Size: 15mm - Threads: 10mm x 26 - Diameter: 17.0mm - Length: 13.8mm - Note: O-ring / seal not included. - 1 cone per bag COMPATIBLE HUBS: - JoyTech 10mm x 26, rear hub - Taiwanese hubs with 10mm x 26 axle
Wheels Manufacturing Inc. CN-R086 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 9mm x 1, front "parallax" style hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 11.0mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech 9mm x 1, front "parallax" style hub - Taiwanese hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R096 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.7mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Ultegra 6400 Front - Shimano 105 HB-5500 Front - Shimano 105 HB-5501 Front - 105 SC 6400 Front
Wheels Manufacturing Inc. CN-R099 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 12.7mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Deore LX HB-M570 Front - Shimano Deore XT HB-M750 Front
Wheels Manufacturing Inc. CN-R102 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 14.8mm - Dust Seal Diameter: 22mm - Length: 10.6mm - 1 cone per bag COMPATIBLE HUBS: - Tiagra 4400 Front - Shimano Sora HB-3300 Front - Shimano Acera HB-M330 Front - Shimano Nexave HB-T300 Front
Wheels Manufacturing Inc. CN-R108 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Rear Right Cone - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 12.5mm - Cone Wrench Size: 15mm - 1 cone per bag COMPATIBLE HUBS: - Sora FH-3300, 9-spd Rear
Shimano Alfine SG-S700 Right Hand Dust Cap
$11.00
Don't let a cracked or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Spank Fratelli Tubeless Ready Tape
$11.90
SPANK Industries Fratelli Tape is a special ultra-light polyamide, adhesive tubeless conversion tape, which is ideal for SPANK's patented OohBah profile rims. Thicker, less pliable tapes are often difficult or impossible when taping complex rim profiles. Fratelli tape makes tubeless set up simple, and adapts well to a variety of rim types, including sleeved and welded joints. 25mm width tape is suggested for rims up to 29mm internal width, and 30mm tape for rims 30mm internal width and greater. With adhesive properties unaffected in a wide temperature range, Fratelli tape is also perfect for winter riders, or those in exceptionally hot environments. - Material: Ultra Thin Polyamide - Width: 25mm or 30mm - Features: high temperature range adhesive, ideal for complex rim profile Installation: - Affix tape all the way around on the right side snug against the bead hook - Then repeat a second circumference around the left side, providing double-thick coverage over the spoke holes - Use a red-hot awl or similar to pierce the valve hole
Bontrager Bontrager Rectangular Base TLR Valve Stem
$11.99 - $14.99
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles
Shimano 105 5800 Rear Hub Left Cone and Lock Nut Unit
$12.00
-Replacement left side cone and locknut for Shimano 105 FH-5800 rear hub
Stan's NoTubes Neo Bearing Kit
$12.50 - $29.00
Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings. - 26mm OD x 15mm ID - 7mm thick
Wheels Manufacturing Inc. CN-R082 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Sovos 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag COMPATIBLE HUBS: - Sovos 9mm x 1, front hub - Taiwanese and similar front hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R084 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech 9mm x 26, front hub - Compatible with 9mm x 26 axle - Cone Wrench Size: 13mm - Threads: 9mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Joytech 9mm x 26, front hub - Taiwanese hubs with 9mm x 26 axle - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Shimano Alfine S700 Small Parts Kit
$13.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock. - Alfine hubs are packaged without small parts and require this kit plus a cog - Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit - For 11-Speed Hub - Includes CJ-S700 Cassette Joint for Vertical Dropouts *Cassette joint does not fit Di2 Alfine hubs
Ritchey WCS Rear Hub Bearing Kit: Vantage II
$14.95
Authentic service bearing kit for Ritchey mountain bike wheels. - Replacement bearings for Vantage II hubs
WTB TCS Rim Tape
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Bontrager Road TLR Tubeless Rim Tape
$14.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel - Width : 17mm
Bontrager TLR Tubeless Rim Tape
$14.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Width : 21mm
Delta Axlerodz Bolt-On Skewers
$14.99
- Extra security against theft - 5mm hex CrMo axle
Shimano Alfine S7000 Cassette Joint Unit
$15.00
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S7000 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S7000-8
Wheels Manufacturing Inc. Axle-06
$15.65
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs - Type: Solid Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 174mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-13
$15.65
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 174mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-19
$15.65
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 155mm - 1 axle per bag
WTB TCS Brass 34mm Valve Stems
$15.95
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
WTB TCS Brass 46mm Valve Stems
$15.95
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
Evo Hex Skewers
$15.99
- 3-piece kit to secure wheels and seatpost - Lighter and safer than regular QR skewers - MTB 100mm/135mm - Seatpost: M6 x 45mm
Stan's NoTubes Tubeless Valve Stems
$15.99 - $19.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
SRAM X0 Hub Conversion Caps
$16.00 - $27.00
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
Wheels Manufacturing Inc. Freewheel/BB Spacer
$16.00
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Mavic 135 > 142mm Rear Axle Adapters - Crossmax
$16.90
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Crossmax rear wheels from 135mm to 142mm spacing - One pair required for each hub to be converted
Mavic 135 > 142mm Rear Axle Adapters - Crossride
$16.90
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Mavic Crossride rear hubs with 135mm spacing to fit frames with dropouts spacing of 142mm - One pair of adapters required for each hub to be converted
Mavic 20mm Front Axle Adapter - Crossmax ST/SX
$16.90
On today's MTB forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic Crossmax ST/SX front hub to use 20mm axle - One pair of adapters required for each hub to be converted
WeThePeople Helix Driver Guard
$16.99
When you own a freecoaster as good as the Helix, you're going to want to keep it protected. WTP's Helix driver guards work on the drive side of the Helix freecoaster and replace the cones for a perfect fit without having to spread your dropouts. - Fits Helix V1 and Helix V2 freecoaster hubs - Available in 7075-T6 alloy or Nylon Fiberglass - Comes with heat-treated chromoly adaptor to replace hub cone nuts for perfect fit
WeThePeople Supreme Hub Guards
$16.99
WeThePeople's Supreme Hub Guards are made of low-friction nylon fiberglass. Simply replace the cones on your Supreme Front and Cassette Hubs for a perfect fit without having to spread your dropouts. Available for both front and rear. These guards now feature a heat-treated chromoly insert for longer life.
Wheels Manufacturing Inc. Axle-33
$16.99
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 187mm - 1 axle per bag
Chris King Front Adjustment Cone
$17.50
With Chris King, precision is everything. Shouldn't your hub bearing preload be precise, too? If the adjustment cone on your Chris King ISO hub is damaged, loose, or you've misplaced it, it's important to get a new one on there ASAP to keep that best-of-the-best hardware operating the way it should.
Bontrager Hardtail Convert Skewers
$17.99 - $24.99
These skewers are a key part in adapting your Convert Mountain Bike to QR axles Key features: - Ergonomically engineered for maximum comfort while removing and replacing your wheel - Work with quick-release wheels and Convert dropouts
SRAM Rise 60 Conversion Caps
$18.00
SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.
Zipp 77/177 Disc Conversion Caps
$18.00 - $34.99
Zipp Speed Weaponry Hub Conversion Caps
Spank Oozy/Spike Front Hub Adaptors
$19.90
Hub Adapters for all Oozy hubs and 2016 Spike hubs.
Spank Oozy/Spike Rear Hub Adaptors
$19.90
Hub Adapters for all Oozy hubs and 2016 Spike hubs.
Spank Spike DH Rear Hub Adaptor
$19.90
Converts SPIKE DH R150 Rear Hubs to 12x157mm. Compatible only with SPIKE and SPOON (150mm) wheels produced in 2015 or later (with SPIKE hubs). - Material : Alloy - Weight (g): ±14 - Compatibility : SPIKE DH 12x150mm Rear Hubs
Mavic 12mm Front Road Axle Adapters
$19.95
On today's road forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Adapts Mavic road wheels to use 12mm front axle - One pair is required for each hub to be converted
Mavic 15mm Front Road Axle Adapters
$19.95
On today's road forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic road hubs to use 15mm axles - One pair required for each hub to be converted
Mavic 9mm Front Road Axle Adapters
$19.95
On today's raod forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic front hubs to 9mm - One pair required for each hub to be converted
Mavic Rear Axle Adapter - Quick Release
$19.95
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Mavic mountain hubs to quick release - One pair is required for each hub to be converted
Mavic Rear Axle Adapter 12/142 (Center Lock)
$19.95
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts MTB rear hubs with Center Lock rotor mount to use 12mm axle with 142mm spacing - One pair of adapters required for each hub to be converted
Mavic Rear Axle Adapter 12/142 for 157mm-spaced Deemax
$19.95
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Deemax rear hubs with 157mm spacing to use 12mm axle with 142mm spacing - One pair of adapters required for each hub to be converted
Page 1 of 5 Next page